CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Support Tech (https://classracer.com/classforum/forumdisplay.php?f=52)
-   -   Air Ride MH problems (https://classracer.com/classforum/showthread.php?t=53110)

Mike Graham 05-16-2014 06:03 PM
Air Ride MH problems
 
I have 98 HR on freightliner chassis. The front air bags are very slow to inflate and seem to be low pressure. Is there a pressure regulator in the air bag system? Ride height valves seem to be ok. can someone point me in the right direction?
Mike Graham

Chuck Westcott 06-04-2014 10:04 AM
Re: Air Ride MH problems
 
In the 90's many MH builders used a Norgren ride height valve to control air in and air out to beach of the Air bags, Mine went bad and I replaced it. there are 2 relay solenoids one on each side. Mine was located in the front up in the frame rail, I have a picture if you need it.

Mike Graham 06-04-2014 10:46 AM
Re: Air Ride MH problems
 
Thanks Chuck. I will check that out.


All times are GMT -4. The time now is 01:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.