CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Header Tethers - Jury IN or OUT (https://classracer.com/classforum/showthread.php?t=51558)

Dean Feiock 01-27-2014 02:51 PM

Header Tethers - Jury IN or OUT
 
This information comes directly to me from someone who attended the recent Div 5 Tech Inspector Training. I also thumbed through the booklet with my own hands that described the procedures and acceptance. But for this conversation consider it as " I heard if from someone, who heard it from someone, who heard it from someone".

Header tethers were a major topic of discussion. AS PER DIV 5, QuarterMax tethers are the only ones that meet the criteria. While there are many on the accepted list, Quarter Max are the only ones with markings on the cable AND clamps. The Quarter Max cable has a dog tag and the clamps are engraved with their name.

With several photos and examples to view at the meeting, Lokar was the worst with no marking on the cable or clamp.

Div 5 IS NOT going to consider color codes or proprietary designs to be a indicator of manufacturer. Quite frankly, there are going to be counterfeits and home made versions, so they need easy to identify markings to ensure compliance ( Engraved or Stamped Brand).

The bottom line is, it must bear the manufacturer name on ALL components.

And a related note, on low slung door cars or any car that may be hard to access the tether, put the tether on so it's most visible. If tech cannot see it, you may have to take it off for them to inspect it.

Again, take this for what it's worth.

I will wait to buy mine, until I know more.

Ed Wright 01-27-2014 03:29 PM

Re: Header Tethers - Jury IN or OUT
 
I have tested collectors enough that I know what it likes. I'm firing up my TIG welder. I don't need to take them off anymore anyway. I can cut the welds if I ever have to. They can slide a mirror under mine and see the welds. Looks like they are going to need a mirror on a stick for checking these things anyway.

Rob Petrie E395 01-27-2014 03:37 PM

Re: Header Tethers - Jury IN or OUT
 
Well if this is the case. The ones I bought (and I got their good version) are not legal. At least the clamps are not. Cause the only markings on the clamps are the name Ideal. Which is the company that made the clamps not the company that made the tethers. And the really crappy part of it is I cannot get the clamps back off without cutting them off because they are wedged between the tube they are on and the 3 other primary tubes. It was a nightmare getting them to slide down no way are they coming back off with out cutting them or ruining them.

Rich67stang 01-27-2014 03:58 PM

Re: Header Tethers - Jury IN or OUT
 
This whole tether issue is a wasted exercise. The welded tabs with grade 8 bolts are not good enough, but ss clamps with wire is? Stupid. I will never put those useless money making tethers on my car. My tabs are inspected all the time for cracks, etc.

C and W Racing 01-27-2014 03:59 PM

Re: Header Tethers - Jury IN or OUT
 
Quote:

Originally Posted by Dean Feiock (Post 418288)
This information comes directly to me from someone who attended the recent Div 5 Tech Inspector Training. I also thumbed through the booklet with my own hands that described the procedures and acceptance. But for this conversation consider it as " I heard if from someone, who heard it from someone, who heard it from someone".

Header tethers were a major topic of discussion. AS PER DIV 5, QuarterMax tethers are the only ones that meet the criteria. While there are many on the accepted list, Quarter Max are the only ones with markings on the cable AND clamps. The Quarter Max cable has a dog tag and the clamps are engraved with their name.

With several photos and examples to view at the meeting, Lokar was the worst with no marking on the cable or clamp.

Div 5 IS NOT going to consider color codes or proprietary designs to be a indicator of manufacturer. Quite frankly, there are going to be counterfeits and home made versions, so they need easy to identify markings to ensure compliance ( Engraved or Stamped Brand).

The bottom line is, it must bear the manufacturer name on ALL components.

And a related note, on low slung door cars or any car that may be hard to access the tether, put the tether on so it's most visible. If tech cannot see it, you may have to take it off for them to inspect it.

Again, take this for what it's worth.

I will wait to buy mine, until I know more.

I don't know about the rest of the Manufactures, But the ones that keith Fulp has on the approved list, KFM, have tags on the cables as well, He was one of the first one out with them. Clamps and tags are lazer etched with his logo. I've had mine since Reynolds and am very pleased with them
Chuck

Bob Gullett 01-27-2014 04:54 PM

Re: Header Tethers - Jury IN or OUT
 
I have no problem with a collector restraint system and I don't be-grudge any of the manufactures of them. What I do have a problem with is that we as racers can install our own chassis and suspension components, weld in our own roll bars or cages, install brakes etc. etc. etc. Some racers are ASA certified technicians, welders, or as in my case being from Canada a federally licenced auto mechanic and we are not qualified to manufacture our own restraint system. A cable and 2 clamps. How hard can it be to make this or bolt an exhaust pipe hangar to the frame or floor boards with a muffler clamp to the collector. Just my opinion.

Bill Marshall 01-27-2014 05:19 PM

Re: Header Tethers - Jury IN or OUT
 
Well said Bob

Jim Wahl 01-27-2014 08:03 PM

Re: Header Tethers - Jury IN or OUT
 
I would suggest doing what I have done. I have a copy of the receipt for my tethers in the glove compartment of the race car. If that and the approved manufacturer's tag affixed to the tether are not good enough I will ask for my entry money back and race elsewhere. Jim


.

Don Fardie 01-27-2014 09:03 PM

Re: Header Tethers - Jury IN or OUT
 
Quote:

Originally Posted by C and W Racing (Post 418301)
I don't know about the rest of the Manufactures, But the ones that keith Fulp has on the approved list, KFM, have tags on the cables as well, He was one of the first one out with them. Clamps and tags are lazer etched with his logo. I've had mine since Reynolds and am very pleased with them
Chuck

Dead On...... No guess work with these for the tech guys if ya have the correct ones or not!

Wheelie58 01-27-2014 10:21 PM

Re: Header Tethers - Jury IN or OUT
 
I'm not sure how the D5 info was presented, but any of my customers can be assured that ones purchased from my company are NHRA approved and easily identifiable...all parts.
To contact me with any questions just google search my name and look for my information or PM me on the forum. Not advertising...for sure, just don't want my customers to get nervous from wrong info.
Thank you,
Keith Fulp


All times are GMT -4. The time now is 06:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.