CLASS RACER FORUM
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   New guy here from NW Indiana (https://classracer.com/classforum/showthread.php?t=49942)

stick shift coupe 10-17-2013 09:39 AM
New guy here from NW Indiana
 
I just wanted to introduce myself to everyone here. Not sure if this is the right place to do so, but i thought it was fitting due to the fact that i am building an nmca class car for the new class n/a limited

DW 10-17-2013 10:03 AM
Re: New guy here from NW Indiana
 
Just let me say WELCOME (even though I'm a .90 racer) to Class Racer <<<

stick shift coupe 10-17-2013 02:51 PM
Re: New guy here from NW Indiana
 
Thank you very much. im mainly on here to learn on how to make my chassis more efficient as well. with our car, we are basically bringing a knife to a gun fight. i enjoy being the underdog. id like to go race some nhra races, but unsure of where we would fit in without making a ton of changes

black88coupe 10-20-2013 07:59 PM
Re: New guy here from NW Indiana
 
Welcome

Robert Simpson 10-20-2013 08:22 PM
Re: New guy here from NW Indiana
 
What are the rules for your class? Can you back half? Or all bolt on? True 10.5, or a 8.5 or a DR? Engine size rule? CI to weight etc? I like these style classes. Also welcome. I feel we can all learn something from all racing.

stick shift coupe 10-21-2013 10:13 AM
Re: New guy here from NW Indiana
 
unlimited shortblock except for flattop pistons, solid roller cam up to .550 lift, any manual transmission allowed as long as shifts are clutch assisted etc..... the way the car is currently, is with a 308 cui small block ford, hyd roller cam, promotion prepped tremec tko600, 5.14 gear, 26x10 stiffwall tires, full tubular front suspension setup with coilovers. car has run a best of 10.41 @ 129.9 mph

Stephen & Horace Johnson 10-21-2013 02:01 PM
Re: New guy here from NW Indiana
 
Quote:
Originally Posted by stick shift coupe (Post 405263)
unlimited shortblock except for flattop pistons, solid roller cam up to .550 lift, any manual transmission allowed as long as shifts are clutch assisted etc..... the way the car is currently, is with a 308 cui small block ford, hyd roller cam, promotion prepped tremec tko600, 5.14 gear, 26x10 stiffwall tires, full tubular front suspension setup with coilovers. car has run a best of 10.41 @ 129.9 mph

you used to run Mean Street?

stick shift coupe 10-21-2013 02:50 PM
Re: New guy here from NW Indiana
 
Yes i did and the class got pulled in favor of a more expensive class that they think will be slower but it wont be. Meanstreet was a low 10 high 9 second class, and n/a limited which replaced it will be high 8's low 9's. Sorry for the caps, i am at work

Scotty B 11-21-2013 09:04 AM
Re: New guy here from NW Indiana
 
I dont see anybody going 8's, maybe 9.50's. and that would take alot of $$$'s and testing. You gonna give it a try?

Alex Denysenko 03-16-2014 08:19 PM
Re: New guy here from NW Indiana
 
Quote:
Originally Posted by stick shift coupe (Post 404782)
I just wanted to introduce myself to everyone here. Not sure if this is the right place to do so, but i thought it was fitting due to the fact that i am building an nmca class car for the new class n/a limited
Hi since we are in your area and speak fluent FORD please keep us in mind for your performance parts needs


All times are GMT -4. The time now is 01:21 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.