CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Chassis dyno in New Jersey (https://classracer.com/classforum/showthread.php?t=48599)

Ken Kopecky 07-30-2013 05:37 PM

Chassis dyno in New Jersey
 
I've been plagued with Ed Fernandez's evil twin gremlin (sorry Ed, I couldn't resist) since the beginning of the season and have tried everything that I can think of to track it down but no luck. I was wondering if anyone in the New Jersey area knows of a place that has a chassis dyno that I can put the car on to see if something can be learned. Some of the shops have closed so if someone can steer me in the right direction, I would really appreciate it.

Ken Kopecky
1454 E/SA

Ed Wright 07-30-2013 05:38 PM

Re: Chassis dyno in New Jersey
 
Julio at Cartek, Garwood NJ.

Pistol Pete 07-30-2013 07:47 PM

Re: Chassis dyno in New Jersey
 
Profab in Whitehouse Station.

Lee Valentine 07-30-2013 08:38 PM

Re: Chassis dyno in New Jersey
 
Ken , Div. one super stock racer Jeff Roell Danbury Chassis Dyno Danbury, CT. Not that far for you. Really knows his stuff has helped a lot of racers.

SGSST109E 07-30-2013 10:34 PM

Re: Chassis dyno in New Jersey
 
Can Bill Trum here. Bobby Ida has a chassis dyno and he if right off Texas rd and rt9 in NJ

Signman 07-31-2013 09:18 AM

Re: Chassis dyno in New Jersey
 
Jeff at Danbury Chassis Dyno. Some top cars roll off his dyno.

Jack Matyas 07-31-2013 12:22 PM

Re: Chassis dyno in New Jersey
 
Kenny - If your car was a Top Fuel / Funny / or a Pro Stock there would only be one fix to the situation that you've been chasing all year - they would do it and so should you - tear out the wiring and redo it all .Then you can go and race again ............

Dennis P Chapman 07-31-2013 12:34 PM

Re: Chassis dyno in New Jersey
 
Quote:

Originally Posted by Jack Matyas (Post 392852)
Kenny - If your car was a Top Fuel / Funny / or a Pro Stock there would only be one fix to the situation that you've been chasing all year - they would do it and so should you - tear out the wiring and redo it all .Then you can go and race again ............

Jack he already did it.

Ken Kopecky 07-31-2013 12:57 PM

Re: Chassis dyno in New Jersey
 
Hi Jack. As Dennis indicated, I redid the wiring, checked all grounds and connections, replaced the entire ignition and fuel systems, new distributor, tach, shift light, batteries, carb, master battery cutoff switch, and retested the MSD setup twice. Still didn't fix the problem. I also checked the cam lift at the vavle, valve lash and static compression in the engine. All checked fine.

Ken

Jack Matyas 07-31-2013 01:10 PM

Re: Chassis dyno in New Jersey
 
Quote:

Originally Posted by Ken Kopecky (Post 392861)
Hi Jack. As Dennis indicated, I redid the wiring, checked all grounds and connections
Ken

Kenny -You have to do more than check them - they must be replaced - all of them or you'll never know ...............


All times are GMT -4. The time now is 04:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.