CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   LS series engine question (https://classracer.com/classforum/showthread.php?t=46108)

Doug Blackley 03-04-2013 08:03 PM

LS series engine question
 
Have a question on the ls series of sbc's. Need to replace the head gaskets on our '01 5.3 motor and have never taken one of these motors apart. Are the lifters on these motors accessible from under the valley cover or from under the cylinder heads?

Jeff Warren 03-04-2013 09:18 PM

Re: LS series engine question
 
Doug, lifters / guides can only be removed after heads are off.

Doug Blackley 03-04-2013 09:38 PM

Re: LS series engine question
 
Ok thanks Jeff. Will have to get those as well, had a feeling this version of sbc was like the new Chrysler hemis we service at the Dodge store I work at. Not pulling them a second time.

Jeff Warren 03-05-2013 08:40 PM

Re: LS series engine question
 
Doug ,We just replaced 2 cam/lifter in Sheriff Chargers for the dreaded #5 cyl failure.

Doug Blackley 03-05-2013 09:47 PM

Re: LS series engine question
 
Common plus be sure to always look at the rocker arm contact to valve area. We get those in waves with the dreaded flat tire in the lifter. Only motor we keep all that stuff in stock for.


All times are GMT -4. The time now is 02:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.