CLASS RACER FORUM
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Just something to think about (https://classracer.com/classforum/showthread.php?t=45677)

Billy Nees 02-07-2013 11:14 AM
Just something to think about
 
A Stock/SS Eliminator Racers take on an old saying;
You can go racing cheap, fast,or easy but you can only pick two of the three ways;
Fast and easy but it won't be cheap
Fast and cheap but it won't be easy
Cheap and easy but it won't be fast

Dennis P Chapman 02-07-2013 11:31 AM
Re: Just something to think about
 
It must be very cold and snowy Billy for all this wisdom to come out.

Jim Wahl 02-07-2013 11:33 PM
Re: Just something to think about
 
Yup, Billy's bored. Jim


.

Doug Blackley 02-08-2013 01:09 AM
Re: Just something to think about
 
Must be time to visit the local yards for the next dime rocket

MAURICE BLENDHEIM 02-08-2013 03:35 AM
Re: Just something to think about
 
Quote:
Originally Posted by Billy Nees (Post 368178)
A Stock/SS Eliminator Racers take on an old saying;
You can go racing cheap, fast,or easy but you can only pick two of the three ways;
Fast and easy but it won't be cheap
Fast and cheap but it won't be easy
Cheap and easy but it won't be fast
Just thought about it and didn't make a bit of "cents". I'll go back to thinking of Dart blocks, 55mm camshafts, 927 keyed lifters, 1.88 rod journals and 9000 RPM SS Big Blocks. Not cheap or easy but will be fast and under the index for more than a grand and not a dime rocket!!! MB.

Bob Bender 02-08-2013 07:19 AM
Re: Just something to think about
 
Quote:
Originally Posted by Billy Nees (Post 368178)
A Stock/SS Eliminator Racers take on an old saying;
You can go racing cheap, fast,or easy but you can only pick two of the three ways;
Fast and easy but it won't be cheap
Fast and cheap but it won't be easy
Cheap and easy but it won't be fast
Billy, U ok ??

Larry Hill 02-08-2013 09:53 AM
Re: Just something to think about
 
Maurice, that sounds like a run of the mill FE stocker engine.

CycloneFE 02-08-2013 11:10 AM
Re: Just something to think about
 
Quote:
Originally Posted by Larry Hill (Post 368282)
Maurice, that sounds like a run of the mill FE stocker engine.
Naw, that would be RPM blocks and they would never see 9000.

Ian Hill 02-08-2013 03:08 PM
Re: Just something to think about
 
similar ...we've always had the three rules - fast, cheap or pretty, pick any two!

Mike Carr 02-08-2013 04:20 PM
Re: Just something to think about
 
Quote:
Originally Posted by Ian Hill (Post 368332)
similar ...we've always had the three rules - fast, cheap or pretty, pick any two!
Are we talking racing, or women? Fairly certain the same can be said for both. lol


All times are GMT -4. The time now is 08:31 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.