CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   My 67 Shelby updates (https://classracer.com/classforum/showthread.php?t=44892)

Ken Miele 12-20-2012 09:03 PM

My 67 Shelby updates
 
6 Attachment(s)
Well I figured I would be the first to post in the new section. Please feel free to post your builds or updates. Make sure you start you own thread and title it as your own, don't add to this thread unless you have questions or comments on my updates.

When the season ends I am always looking to update my race car. Whether its small or large, I always like to do something in the off season.


My first update was to add a power cut off handle inside the car. I can't tell you many times I have gotten into my car and forgot to turn on the power. Every year I tell myself I am going to put a handle in, but never seem to get around to it. Well this year I did. I took a piece flat stock 1/4 inch aluminum and cut to size and drilled some holes to make it look nice along with a contour for your hand. I used another piece flat stock to act as the lever on the cut of switch. It worked out great and I could not be happier.

The next update was the dash. Greg Kelley from MOTORSPORTS Innovations hook me up with a Racepak Dash unit. He is a Class Racer sponsor and is great to deal with, if you need any help with Racepak products, he is the man to go to.

I love new technology and always wanted one in my car. I already have a Racepak data logger so the install was as simple as plugging into the Racepak logger and it recognizes all sensors. I get oil pressure, water temp, air fuel ratio, volts, fuel pressure and of course a tach. I can also add more if I wish. I left my old tach in place just in case I don't like the way the shift light works. I don't use a shift light, but the new dash has 5 lights on each side of the top part of the dash, they go from green to amber to red so you can get ready for the shift. You can set how fast the lights comes on. If it works well I will get rid of the old tach.

Well that's it for now, if I do anymore updates, I will be sure add to this thread.

Notch1320 12-20-2012 09:49 PM

Re: My 67 Shelby updates
 
Looks GREAT Ken! Glad to see this section added as well.

Dion Hildebrandt 12-21-2012 10:19 AM

Re: My 67 Shelby updates
 
Love the inside power cutoff setup. Is that a transmission cable that hooks it all up?

Ken Miele 12-21-2012 10:32 AM

Re: My 67 Shelby updates
 
Dion,

Yes, its a shifter cable. You can uses shifter brackets to hold the cable or fab something up. Its a fairly simple job.

Dave Turner 12-21-2012 02:21 PM

Re: My 67 Shelby updates
 
.....OR, if your fabricating skills are lacking, the folks at Lokar make a nice alternative. :)

Ken Miele 12-21-2012 03:13 PM

Re: My 67 Shelby updates
 
Dave,

I agree totaly, they make great stuff. My skills are just okay, but I like doing it, it's therapeutic for me.

The Hitman 12-22-2012 12:12 AM

Re: My 67 Shelby updates
 
Great idea on the interior shut off,

Great Section BTW!

Jack Matyas 12-22-2012 11:21 AM

Re: My 67 Shelby updates
 
Quote:

Originally Posted by Ken Miele (Post 361902)
Dave,

My skills are just okay, but I like doing it, it's therapeutic for me.

And God knows you need therapy ............

Billy Nees 12-22-2012 12:31 PM

Re: My 67 Shelby updates
 
Quote:

Originally Posted by Jack Matyas (Post 362019)
And God knows you need therapy ............

Jack, that's no way to be talking about the boss right before Christmas bonuses!

CBS 12-24-2012 09:56 AM

Re: My 67 Shelby updates
 
Kenny....what did you decide to do engine wise.....old or new....?


And the inside shutoff switch is mandatory ......on our cars...lol


All times are GMT -4. The time now is 07:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.