3rd gen camaro throttle linkage?
 

I am setting my camaro to run sst & hr. I am running a throttle stop on the carb and want to convert the cable. Can you guys give me recommendations, solid rod or morse cable? Can you post or send pics?

Thanks,

Frank

Re: 3rd gen camaro throttle linkage?
 

I may not have worded the question properly. I am installing a throttle stop (Biondo PCTS-SH) and the factory cable I believe is not a good choice due to too much stretch for consistency. Do you guys have recommendations, solid linkage or morse? I will only be cutting .3 to .5 ET. If you have done this can you send pics.

Thanks,

Frank

Re: 3rd gen camaro throttle linkage?
 

I use a inline with a factory cable and CSR bracket with no problems.

Re: 3rd gen camaro throttle linkage?
 

Ken, are you running a dominator or a 4150? Which CSR bracket do you have? I'm running a 4150 and have a CSR bracket for the snap in cable that I've been using without the t-stop but didn't think that will work. Thanks for the help, need all I can get.

Re: 3rd gen camaro throttle linkage?
 

frank, if you are that close to the index, i would just add weight. this can be VERY consistant. and could save you a lot of time and $.

Re: 3rd gen camaro throttle linkage?
 

I ran a 4150 until last year, but now have a 4500. They do not have a extended bracket for a snap in cable, so I modified mine a little. I still have it if you are interested.