valve springs
 

does anyone have any info on a better product. as posted below in another thread, during my time on the dyno, we were limited to the amount of timing i could put into the engine because the valve springs would start to fail at 6850 and full float at 7000rpm. i am running a hydraulic cam 430 lift. we are running a bee hive sytle spring now and any help on part numbers or brands that i could do some testing with would be appreciated.


Thanks
Ian

Re: valve springs
 

whats the application??

Re: valve springs
 

IHRA crate motor - 350 ci 340 hp with 434 lift flat tappet cam with roller rockers

Re: valve springs
 

Comp Cams 941 in at 1.750 installed height. This is what I had on my wagon and it had no problems going 7500.

Re: valve springs
 

I have used the poop out of PAC 1409s. 8000 rpm in my 283. I can give more details. e mail me at jimschaechter@earthlink.net