CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Race Parts: Classifieds (https://classracer.com/classforum/forumdisplay.php?f=12)
-   -   Stocker cores, heads, blocks, intakes (https://classracer.com/classforum/showthread.php?t=14664)

jdfpam 12-12-2008 01:00 PM

Stocker cores, heads, blocks, intakes
 
I really have too much stuff to list, it may be easier for you to email or call me with what you are looking for. I have literally tons of Chevy, Chrysler, and Ford cores. Most all is virgin untouched castings (which some of you probably need now) from the 60's, 70's, and 80's. Some parts have been cleaned and magnafluxed, and those are the only with guarantee's. Parts that are not checked out will not be guaranteed. I am only selling these parts because I am simply out of space. Email/PM with specific application/casting numbers or dates. Please no tire kickers and I will not sell as one large lot. No one person will get everything unless they are willing to pay up. I would really rather let my fellow racers buy and use up these parts. Please print this page out to keep for future reference.

Jeff Day
#3731
(330)456-3045

here are some parts that I have:

BB Chevy 396 (13) oval port, 2 bolt main complete engines, bare blocks 961/406/323/272/854/290, cast and steel cranks, oval port cast iron heads 063/215/290, cast iron intakes (6) 948

BB Chevy 454 engines, you name it

Chevy 348 Block, heads, crank, rods

SB Chevy 283 (5) complete engines 548, bare blocks 739, cast and steel cranks, factory heads 898

SB Chevy 305 (3) complete engines, bare blocks, cast cranks, thick and thin heads, 601/416/434/450

SB Chevy 327 and 350 (12) large and small journal, complete engines, bare blocks, cast and steel cranks, regular and double hump heads 461/462/291/186/041/290/185/624, cast iron intakes

Literally a truck bed load of brackets, pulleys, water pumps, alternators, harmonic balancers for big and small block chevys

Quadrajet carbs (4)

SB Chevy 400 (3) Complete engines, short blocks, bare blocks, cast cranks, cylinder heads

BB Chysler 906, 902, 346, 516, and 452 heads
Complete early 1968 383 engine, two barrell, with 906 heads
Many 400, 413, 426, and 440 BB Chrysler blocks, complete engines, cranks, and heads

300 Ford 6 Cylinder engine

1969 Ford 302 block, crank, heads, rods

1988 Ford 302 roller short block

Old Jeep/Kaiser 6 cylinder continental F226

Old continental F162 industrial engine

Man, what else?

O-yeah.....

400, 425, and 455 Oldsmobile

350 Buick Complete 4 barrel engine

Dick Butler 12-12-2008 05:41 PM

Re: Stocker cores, heads, blocks, intakes
 
Any 409 stuff? looking for Heads and short block for 409 HP motor....or Z-11 manifold.

jdfpam 12-15-2008 11:32 PM

Re: Stocker cores, heads, blocks, intakes
 
Dick,
No, I wish. I have never owned any. We just did a set of heads, but other than that, I haven't seen any of that stuff in quite a while.


Jeff Day
#3731

Larry Hill 12-17-2008 10:44 PM

Re: Stocker cores, heads, blocks, intakes
 
Please let me know what and how many 906 heads,440 short ,long blocks, and six pack intakes. Also I am always looking for a few good 410 Mercury cranks.

Thanks Larry

jdfpam 12-18-2008 11:34 PM

Re: Stocker cores, heads, blocks, intakes
 
Larry,
410 Mercury cranks? Sorry, I don't know if I have seen one of them! I also don't have any 6 pack stuff. I do have a few 440 blocks left, two or three sets of virgin 906 heads, and a half dozen steel 440 cranks. I also know where there are some 440 Motorhome engines at-complete. Please email or PM with any request.

Thanks!

Jeff Day
#3731


All times are GMT -4. The time now is 06:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.