CLASS RACER FORUM - Block Honing

Page 1 of 3

Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)

- - Block Honing (https://classracer.com/classforum/showthread.php?t=83381)

Robert Simpson

11-01-2022 09:12 PM

Block Honing

Who is a good machinist to hone a block for a stocker? Would like to find someone using the newer CNC honing equipment. Preferably in the SE. Just let me know what you recommend.

Thank You

Robert

MR DERBY CITY

11-01-2022 10:26 PM

Re: Block Honing

I am sure that Randy Daniels OR the Warren family would be up for the task.

J.R. Haddad

11-01-2022 10:59 PM

Re: Block Honing

Make sure they have new or newer Rottler Honing machines, if not walk
away, regardless of what your told.

JR

SBillinson

11-02-2022 12:19 AM

Re: Block Honing

Quote:

Originally Posted by J.R. Haddad (Post 670258)

Make sure they have new or newer Rottler Honing machines, if not walk
away, regardless of what your told.

JR

So a Sunnen SV-10 or 15 is a POS?

Larry Hill

11-02-2022 05:03 AM

Re: Block Honing

Diamond stones work well

Frank Castros

11-02-2022 07:29 AM

Re: Block Honing

Weston Machine Piscataway NJ

jmcarter

11-02-2022 08:12 AM

Re: Block Honing

Robert you might call Glenn Treadwell (Treadwell Nursery north of Orlando), know he does good work including some for some well respected racers). If not the Warren’s would be an option to explore.

Mike Pearson

11-02-2022 08:32 AM

Re: Block Honing

Talk to Denny Stewart too. If not him he can point you in the right direction. I use Mike Thompson in Naples for my machine work. He doesnt have a CNC hone but is more than capable.

TONY C 2200SS

11-02-2022 09:59 AM

Re: Block Honing

Quote:

Originally Posted by Robert Simpson (Post 670249)

Who is a good machinist to hone a block for a stocker? Would like to find someone using the newer CNC honing equipment. Preferably in the SE. Just let me know what you recommend.

Thank You

Robert

robert give me a call tony conte 727 531 6313

340Cuda

11-02-2022 11:18 AM

Re: Block Honing

If I was having a block honed I would sent it to Brad Lagman at QMR.

https://qmpracing.com/

However he usually has a pretty big backlog.

All times are GMT -4. The time now is 04:10 AM.

Page 1 of 3

Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.