quadrajet question
 

How far off would a top shelf carb for a 350/255/280 69 camaro be when put on 81 malibu 305/155/232.

Re: quadrajet question
 

I have a Deano's Quadrajet (built from a new core) that has never been installed, that was built for a 305 Super Stock motor. Dean built it with specific instructions to calibrate it on the lean end of the richness scale, so that it could be used as a "bad air" carb. Based on that, I think it would be almost perfect for a 305 stocker. PM me if you're interested. I'll treat you right.

Re: quadrajet question
 

Is that carb new or used and how much do you do you want.

Re: quadrajet question
 

Is that carb new or used and how much do you do you want.

Re: quadrajet question
 

Peter, get the COVID out of your ears! He said "
I have a Deano's Quadrajet (built from a new core) that has never been installed". Call him! Jim


.

Re: quadrajet question
 

Bolt of on and try it.
It’ QJet . No 2 carbs are the same.
Good carb is a good carb ...

Re: quadrajet question
 

I have several Edelbrock Perf. Quadrajets = New and used

I put one on my National Record Holder Dodge Truck a
few years back with no changes except rods.

It ran within 2 Hundreds of my best pro modified piece.

The are legal since they quit running numbers and just measure
them now = as long as the right size in dimensions!

Re: quadrajet question
 

Yes it should be very close to a 255/350. But it depends on what air they were in the last time they ran the car compared to the air you are going to try it in. If that carb was last ran in July and you are going to try it in October, it could be a little on the lean side.’

Re: quadrajet question
 

It won't be far off at all. I would try it and tune it as is then I would take out two on the main jet and try that.

Re: quadrajet question
 

The Q-Jet I had available has been sold. Thanks to everybody who expressed interest.