CLASS RACER FORUM
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Leather accelerator pumps (https://classracer.com/classforum/showthread.php?t=86917)

Ed McLawhorn Jr. 03-06-2024 07:07 PM
Leather accelerator pumps
 
With the poor quality accelerator pumps currently found in carb kits, will a leather pump hold up with racing gas…renegade 112? 4gc on a super stocker. Thanks.

Ed

Jack McCarthy 03-06-2024 10:47 PM
Re: Leather accelerator pumps
 
works with c11&12

capt

John Dinkel 03-08-2024 03:15 PM
Re: Leather accelerator pumps
 
I have run leather for years with no problems.

Lyn Smith 03-08-2024 05:50 PM
Re: Leather accelerator pumps
 
The trick used to be to soak your leather pump cups in brake fluid to keep them soft, or to soften them up. I use viton pump cups NAPA number 2-4112 in all my carbs .Cost about $7.50 each.

Ed McLawhorn Jr. 03-08-2024 10:18 PM
Re: Leather accelerator pumps
 
Quote:
Originally Posted by Lyn Smith (Post 694767)
The trick used to be to soak your leather pump cups in brake fluid to keep them soft, or to soften them up. I use viton pump cups NAPA number 2-4112 in all my carbs .Cost about $7.50 each.
Thanks Lyn for the Napa part number and leather soap tip.

Coleydog 03-09-2024 11:11 PM
Re: Leather accelerator pumps
 
I’m thinking the alcohol eats the leather up along with fuel pumps and carbs but with race gas no

Henrys Toy 03-10-2024 09:05 AM
Re: Leather accelerator pumps
 
Quote:
Originally Posted by Ed McLawhorn Jr. (Post 694663)
With the poor quality accelerator pumps currently found in carb kits, will a leather pump hold up with racing gas…renegade 112? 4gc on a super stocker. Thanks.

Ed
Good morning Ed and to all,
Does the 4 GC use the same size pump as the Rochester 2 Barrel or is it the Dia. of the Q-Jet pump?
Its been years since I've been inside one of those carbs.
Have a Good Day.

Respectfully,
Henry Kunz 1534 H/SA

SSDiv6 03-10-2024 11:19 AM
Re: Leather accelerator pumps
 
All racing fuels contain Triethylamine.
They will kill the leather and even the Viton cups that usually come in the carb kits sold at auto parts stores.

I recommend the use of cups sold by companies such as Quadarjet Power, Quadrajet Parts, and others. They sell cups that are resistant to the new generation of fuels and are made from either Butyl, EPDM, Neoprene, or Hypalon rubber.

Ed McLawhorn Jr. 03-10-2024 11:55 AM
Re: Leather accelerator pumps
 
Quote:
Originally Posted by Henrys Toy (Post 694803)
Good morning Ed and to all,
Does the 4 GC use the same size pump as the Rochester 2 Barrel or is it the Dia. of the Q-Jet pump?
Its been years since I've been inside one of those carbs.
Have a Good Day.

Respectfully,
Henry Kunz 1534 H/SA
Henry, the 4gc has a couple different sizes. The one I’m running (1966, 283/233hp) is 21/32” cup and the “long stem” pump. I’m not sure about the 2 barrel carb.

monte385 03-10-2024 03:30 PM
Re: Leather accelerator pumps
 
Not pitching for Cliff but he says his are alcohol proof.


All times are GMT -4. The time now is 07:03 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.