Quicktme Resert
 

Where can you send a quicktime bellhousing for recertification ? Is there anywhere in Canada ?

Re: Quicktme Resert
 

Holley.com,. They are under the holley umbrella

Re: Quicktme Resert
 

I looked in there website but could not find any info or address to send it

Re: Quicktme Resert
 

866 464 6553, try this

Re: Quicktme Resert
 

In the past you would need to contact Holley Tech Service to set up a order to send in and have it re certified. They let Ross McCombs go about the time I retired so I don't know who will perform them going forward.

If you have issues i can get the name of the product manager to figure out how to get this done.

Robin

Re: Quicktme Resert
 

Thanks for the replies. I will try and call them this week.

Re: Quicktme Resert
 

Thanks for the info Robin, I did not know about Ross, I knew about you, just wondering where Holley is going.

Re: Quicktme Resert
 

I have a number that I believe Ross answered and he would walk you thru what to do (Holley,shipping etc). Was Ross the founder of Quiktyme ? Something tells me he was, and sold but kept working for them. He was VERY helpful when I got mine recerted. PM me here and I will give you the number. If he is not there anymore, maybe someone will answer the phone.

Re: Quicktme Resert
 

Dave I sent you a PM

Re: Quicktme Resert
 

Good luck trying to call them. I have tried several times and have been on hold forever until I gave up.
Holley has discontinued the Quick time bell housing for a Small Block Mopar with a Jerico. These companies have gotten too big and screw the little guy.

Re: Quicktme Resert
 

Quicktime used to be a great company before they got bought out. Good quality product and reasonably priced. When I needed on recerted, you would actually talk to the owner
on the phone. As soon as they got purchased, all of their bellhousing got doubled and tripled in price.

Re: Quicktme Resert
 

I tried the number that Dave supplied me .It was no longer in service. Tried Holley's number but was stuck on lifetime hold. I will try again Saturday morning. Hpefully better luck.

Re: Quicktme Resert
 

I sent you a PM with an e mail contact.

Robin

Re: Quicktme Resert
 

PM did not come through Robin. Thanks

Re: Quicktme Resert
 

I remember going through the same ordeal when I had to get my QuickTime recertified. I don’t know how many calls I made until someone gave me Ross‘s number. He was able to get it all taken care of. Since then I went with the Mcleod aluminum. Thank God I don’t have to go through that anymore.

Re: Quicktme Resert
 

I need a Quick Time recert. Any updates from the info already in this thread?
Thank you and Happy New Year!

Re: Quicktme Resert
 

I was talking to a racer the other day who told me that Quick Time won't recertify their own bell housing. Was told once it has expired its done. That's why I have a Browell. He will recertify his.

Re: Quicktme Resert
 

Thanks Bob, you might have my favorite Stocker:D
Just spoke with Jeremy at Holley.
Called 866-464-6553
Chose "Tech Support", perpetual hold, twice.
Called back, chose "Returns"
Nice lady connected me with Jeremy, who apologized for the hold and said its 8:30 (CST) before everyone is answering.
$250 for 5 year Certification
Shipping to: Holley Performance Group
Attn: Quick Time/ Lakewood Order (my order #)
6674 189th St.
Albia, Iowa 52531
Says it will take 2-3 weeks.
Happy New Year!

Re: Quicktme Resert
 

That's good to hear. I'll have to talk to my friend and tell him to read your post.

Re: Quicktme Resert
 

Sure miss Tim Hyatt, used to take my bellhousings to the Hyatt Racing trailer, where he would inspect and put a new sticker on the bellhousing, often while you waited, unless he was busy, but normally on the same day, for $50.00 . No shipping, price gouging, or other BS.

Re: Quicktme Resert
 

The good old days, I`m sure. I thought the 5-year deal was a bargain, comparatively speaking. Let's see if this goes according to plan. I`ll post results.

Re: Quicktme Resert
 

Before Quicktime got bought out a few years back, the owner was about the nicest and most cooperative guy you could ever talk to. He would always take your call and the initial price of purchase and the recert fees were very reasonable. As soon as they got bought out, the price went through the roof.

Re: Quicktme Resert
 

Like everything else Jim. I get sticker shock on a monthly basis these days..

Re: Quicktme Resert
 

Joe, how do you like that bellhousing. Looks like a bigger window. Is it much lighter than the quicktime?

Re: Quicktme Resert
 

Good luck finding one new. I have tried to buy one for a year now and they keep saying to check back in 90 days.

Re: Quicktme Resert
 

I love it! Bigger window and 15 lbs. lighter!

Re: Quicktme Resert
 

Got my Quicktime bellhousing back today from Holley Performance Group
New SFI sticker (5 year), window bolts, clutch fork ball, Quicktime Decal and
fresh black powder coating. Looks brand new.
$283 for HPG
$69 to ship Ct. to Iowa
Have not seen return charge on my statement yet, but I assume it will be similar.
Service was above my expectations, great job by them.
I`m as happy as I can be, after spending $425 on a bell recert :D

Re: Quicktme Resert
 

Man, that seems like price gouging. I am thinking about getting a new bellhousing, been looking at Browell, a bit more $$ up front, but they only charge $75.00 for recerts. Seems that ever since QuickTime got bought up by Holley, not only did they drastically jump up in price, but they also dropped many of the older Lakewood, and slower selling QuickTime models.

Re: Quicktme Resert
 

I just got my Quicktime bellhousing back today (4/15/2025), same as Mike, service was quick and it looks great. Gone are the cheap recert days, but at least the service was good.

Re: Quicktme Resert
 

I?m glad it worked out for you. I?ve called them 3 times this month to get mine Recertified. I talk to someone who promises someone will call me back?no luck! Guess I?m talking to the wrong people! Frustrated!

Re: Quicktme Resert
 

On Browell website Bellhousing recertifications cost $75.00

Re: Quicktme Resert
 

I believe you need to select returns in the phone menu, because they will give you a rga number

Re: Quicktme Resert
 

I called Browell and ordered a new bellhousing yesterday; I was talking to Brian in about 5 seconds. I like buying from companies like that, pick up phone and call and you are talking or they call you back asap, someone that knows about what they are selling.

Re: Quicktme Resert
 

Someday I may have a browell, but for now my Quick Time will do. Also worth mentioning is on the recert I just had done, they stripped and re-powder coated the bellhousing. Apparently they always do that. new window cover bolts and clutch pivot ball too