CLASS RACER FORUM
Page 95 of 109 « First 45859394 95 9697105 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   Dumbo The Flying Elephant (https://classracer.com/classforum/showthread.php?t=72394)

Larry Hill 04-14-2024 02:07 PM
Re: Dumbo The Flying Elephant
 
Wow did it feel good to be working on Dumbo. After a season and a half under the hood is just very dirty and dusty. Removing the engine is a must to get clean.

Larry Hill 04-16-2024 07:02 AM
Re: Dumbo The Flying Elephant
 
I may have found an occasional miss fire, engine coolant in the spark plug well. I think Dumbo will be quicker hitting on all 16 plugs.

Larry Hill 04-16-2024 06:55 PM
Re: Dumbo The Flying Elephant
 
All plugs a little bit oily but not real bad. It so much easier to check valve lash with the engine out

Rick J 04-17-2024 11:02 AM
Re: Dumbo The Flying Elephant
 
Quote:
Originally Posted by Larry Hill (Post 692484)
I finally got the stuff made and was able to figure installed height. The kool part is I was instructed to get several different sets of valve locks. The standard, the +.050, the -.050, and the top lock. It moves the installed height around and with the help of shims I will be able to get to my coil bind target number on each spring. I’m hoping to get to size to plus .005” on installation height.

A tip of the Hat to all of the cylinder head folks, it’s not easy just to get the installed height correct, past Tech, and run hard all the way to the Finnish line. The real good cylinder head people are a bargain.
FYI, avoid +.050 locks if you can, if not use 10° locks & retainers.
Reason is locks only clamp on the valve stem below the groove, the ID of the lock is larger above the groove.

Larry Hill 04-19-2024 10:45 AM
Re: Dumbo The Flying Elephant
 
Thanks I will check that.
Spoke with someone that had some thoughts on why the head leaked coolant in to the spark plug bore. Coolant casting core flotation. I wonder why it took two seasons of racing to appear on this head an only one season to cause a problem on the odd cylinder head. One of life’s little mysteries.

Larry Hill 04-21-2024 08:57 PM
Re: Dumbo The Flying Elephant
 
The down side of doing it yourself, forgetting where I placed a tool because, “I don’t use it that often”. After some time I found it. Just another stupid old man trick.

Billy Nees 04-22-2024 07:26 AM
Re: Dumbo The Flying Elephant
 
Larry, look at the bright side! Soon you'll be able to hide your own Easter eggs!

goinbroke2 04-22-2024 02:01 PM
Re: Dumbo The Flying Elephant
 
Quote:
Originally Posted by Larry Hill (Post 696358)
The down side of doing it yourself, forgetting where I placed a tool because, “I don’t use it that often”. After some time I found it. Just another stupid old man trick.
Oh that's nothing, wait until you forget how to do the simplest thing...on a video for everyone to see! LOL!!

Larry Hill 04-23-2024 03:55 PM
Re: Dumbo The Flying Elephant
 
Dropped the head off at Jeff Taylor Performance. Jeff said that I’m not the first to have the problem. It’s the same end on the same casting number. He made some other recommendations that should help us get a little closer in the HP race.

Larry Hill 04-26-2024 10:17 AM
Re: Dumbo The Flying Elephant
 
Today and this weekend we haven’t any granddaughter functions to attend. I should get a lot of things re-verified and cleaned.


All times are GMT -4. The time now is 06:40 AM.
Page 95 of 109 « First 45859394 95 9697105 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.