CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   H-I-J '76 Nova re-fit. (https://classracer.com/classforum/showthread.php?t=67661)

HandOverFist 08-20-2018 09:24 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by Painter (Post 570355)
General regulations require it be welded. Whoever replied to your email must have only looked in the "Stock" section of the rule. I got caught on it is how I know. I got mine from Summit and don't think it moved the wheel at all.

If that is the actual case and was called on it I would just go with the swing-out bar myself...makes all the difference in the world getting in and out of many of these cars. Those high side bolsters on the aluminum seats compound the problem.

Nmbr1GMfan 08-20-2018 09:25 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by Painter (Post 570355)
General regulations require it be welded. Whoever replied to your email must have only looked in the "Stock" section of the rule. I got caught on it is how I know. I got mine from Summit and don't think it moved the wheel at all.

Thank you. And which one did you use?

Painter 08-20-2018 09:28 PM

Re: H-I-J '76 Nova re-fit.
 
I am a long way from the car, but knowing me it was the cheapest!

Nmbr1GMfan 08-20-2018 09:54 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by Painter (Post 570364)
I am a long way from the car, but knowing me it was the cheapest!

Haha gotcha thanks.

nickh 08-21-2018 01:59 PM

Re: H-I-J '76 Nova re-fit.
 
Todd the car is a piece of art. Attention to detail is breath taking.

Nmbr1GMfan 08-21-2018 04:26 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by nickh (Post 570443)
Todd the car is a piece of art. Attention to detail is breath taking.

Thanks Nick, Much appreciated. It's been a great ride so far. The real fun will be next year when we see how good we are at making this thing haul *****!

Nmbr1GMfan 08-22-2018 06:05 PM

Re: H-I-J '76 Nova re-fit.
 
Been a rough week at work so far and I haven't gotten anything done. Autumn has been running parts around after school and I finally got in the shop for a couple hours today. Made the last ground strap, the starter cable, and it actually turned over for a second so that works. Started working on the brake pressure gauge so I can get the last flex hose made this week to button up the brake system.
https://i.imgur.com/p32RVCI.jpg
https://i.imgur.com/YDVm1NS.jpg
https://i.imgur.com/UveveDQ.jpg

Nmbr1GMfan 08-25-2018 10:13 PM

Re: H-I-J '76 Nova re-fit.
 
How does a 20 minute job take 3 hours! My wife simply calls it... car time. :D:D
Made a thread chase to work on the wheel stud threads, got them all straightened out. Put a new set of studs in and finally got the rear back together. Brakes are on, brake lines are on, pressure gauge is mounted and plumbed too. We started to run the fuel lines for the final time too. Autumn worked on the tank brackets and of coarse drilling and tapping the radiator for no other reason than why not change EVERYTHING since that is our current theme. :D Back at it tomorrow!
https://i.imgur.com/JPmkCej.jpg
https://i.imgur.com/i99Fd7g.jpg
https://i.imgur.com/JkfYgTq.jpg
https://i.imgur.com/VBjoeFM.jpg
https://i.imgur.com/tmzajcI.jpg
https://i.imgur.com/AaOeO83.jpg
https://i.imgur.com/smrOK3k.jpg

Gary Merrick 08-26-2018 09:33 AM

Re: H-I-J '76 Nova re-fit.
 
Hey Todd,

When you do it RIGHT the first time, you will never have to touch it again, no matter what the project is. Obviously, you and your daughter are doing it RIGHT.....

Congrats on the build, it is Very Special!!!!


Gary Merrick
3522 Stock

Nmbr1GMfan 08-26-2018 04:48 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by Gary Merrick (Post 570751)
Hey Todd,

When you do it RIGHT the first time, you will never have to touch it again, no matter what the project is. Obviously, you and your daughter are doing it RIGHT.....

Congrats on the build, it is Very Special!!!!


Gary Merrick
3522 Stock

Thank you Gary.


All times are GMT -4. The time now is 09:14 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.