CLASS RACER FORUM
Page 50 of 51 « First 404849 50 51
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   '67 Camaro E/SA redo (https://classracer.com/classforum/showthread.php?t=50660)

Alan Nyhus 04-29-2015 07:11 AM
Re: '67 Camaro E/SA redo
 
Good to see things heading the right direction for 'ya, Rich. Your hard work is paying off. :)

74fb461 04-30-2015 02:22 PM
Re: '67 Camaro E/SA redo
 
Looking good rich! I just bought some global west(111SH) del rin bushings and shackle kit for the back of my bird. Will be putting them in sat ,before sundays race.

HandOverFist 06-28-2015 05:30 PM
Re: '67 Camaro E/SA redo
 
Nothing really new with the car atm. Carb was pretty fat at BG....put some 64 jets in the primaries and some AN rods in the back for the next outing.

I lowered the truck 2 inches in the back this weekend and put a set of 18 inch wheels/tires on for good measure. The old tires were getting long in the tooth and driving in the rain made me a little nervous. Truck rode awful being lowered with the air bags in place so I took them off today. I have a set of air shocks on the way which should work just fine.

Found us a much needed pit bike Saturday on Craigslist...a 1978 Honda 50 Express. All original with only 1600 miles, it should fill the bill for the duration of our racing years.

http://i434.photobucket.com/albums/q...pseiboexhe.jpg

http://i434.photobucket.com/albums/q...pso9kxci5c.jpg

http://i434.photobucket.com/albums/q...psbfjrn6cx.jpg

brent flynn 06-28-2015 09:17 PM
Re: '67 Camaro E/SA redo
 
Quote:
Originally Posted by HandOverFist (Post 468887)
I'll wait until I take the car to Bowling Green for 60' reference...it has never been that low at BG. It may want a little carb tuning as it was off a little in mph. I won't be completely surprised if there is little to no improvement in e.t. Best 1/8th e.t. to date has been 7.18.
I dig the Honda! I ran a 7.19 a couple weeks back.. I changed back to the smaller cam, from last year, and car is ready to go...if it will just stop raining.... Hope to test Wednesday... and race on Saturday... Looking forward to Columbus ...

Geerhead55 06-29-2015 03:41 PM
Re: '67 Camaro E/SA redo
 
Gotta love those vintage Honda "pit bikes"! We've got an 'ol 83 200S 3-wheeler that is beefy enough we can use it to haul a dead racecar back to the pits if we have to.
Take care, Rich. Good luck the rest of the way.
Danny Durham

Mark Yacavone 06-29-2015 04:39 PM
Re: '67 Camaro E/SA redo
 
Keep those Lil' Hondas rolling:

http://www.servicehonda.com/

HandOverFist 07-04-2015 05:43 PM
Re: '67 Camaro E/SA redo
 
What do you think about an addition to the stable? A '65 Chevelle wagon...

http://i434.photobucket.com/albums/q...psp4swqlni.jpg

Glenn Hayes 07-04-2015 06:01 PM
Re: '67 Camaro E/SA redo
 
Stocker Wagons make really fun street cars too !


Congratulations on the new member of the Garage Family.
Is it turn key? How about some info on it?

HandOverFist 07-04-2015 06:45 PM
Re: '67 Camaro E/SA redo
 
Supposedly a done deal, but it is not in hand yet. About a ten hour drive away atm. Yes, ready to roll but will have to build a 327 for it.

J Gower 07-04-2015 09:27 PM
Re: '67 Camaro E/SA redo
 
The 327/250 is a good motor combo for that car. J. Gower O/S 3058


All times are GMT -4. The time now is 12:01 PM.
Page 50 of 51 « First 404849 50 51
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.