CLASS RACER FORUM
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Automatic Shifter Options (https://classracer.com/classforum/showthread.php?t=78715)

mannymen 03-16-2021 04:50 PM
Re: Automatic Shifter Options
 
Never liked the turbo action and how it slides from Neutral into 1st for T-400 reverse application. You never really know if it's truly in first where it should be, whereas a ratchet is in or its not.

Gmirza 03-16-2021 07:49 PM
Re: Automatic Shifter Options
 
Quote:
Originally Posted by mannymen (Post 636765)
Never liked the turbo action and how it slides from Neutral into 1st for T-400 reverse application. You never really know if it's truly in first where it should be, whereas a ratchet is in or its not.
I know for the 727/904 shifter they offer two gates. One has a positive stop for first. The other, like you stated, can be used with an air shifter. I agree, you have to be careful with that gate. The other one is nearly fool proof when manually shifting.

gsa612 03-16-2021 10:35 PM
Re: Automatic Shifter Options
 
If you ran a glide you couldn't beat a Perry shifter...gsa612

chris ok 03-17-2021 11:19 AM
Re: Automatic Shifter Options
 
B&M Quick Silver. Forward or reverse pattern.
NHRA and IHRA approved.
Using mine 20 years. Just changed cable once. It fell on exhaust. My fault.

Chad Fergen 03-18-2021 12:10 AM
Re: Automatic Shifter Options
 
Quote:
Originally Posted by Tom Goldman (Post 636397)
I'd say 90% of the cars I work on or build use the TurboAction Cheetah shifter ,
It's a simple design and if I'm not mistaken ,the base component has aircraft origins .
I've seen 30 year old Cheetah's that still work flawlessly.
Had one in my own Stocker .
I have been looking at these and it appears they are out of stock. In all fairness I only checked Jegs and Summit. I believe the part number is 70012. Heading to Vegas next month. I might have to focus and squeeze the trigger for 3rd. ;)

PS, The BBB is cool but out of my pay grade.

Alan Nyhus 03-18-2021 09:31 AM
Re: Automatic Shifter Options
 
Quote:
Originally Posted by Chad Fergen (Post 636883)
Heading to Vegas next month. I might have to focus and squeeze the trigger for 3rd. ;)
Chad: just put a B&M Pro Ratchet in it and Rule the World! ;) -Al

Tom Goldman 03-18-2021 01:18 PM
Re: Automatic Shifter Options
 
Quote:
Originally Posted by Chad Fergen (Post 636883)
I have been looking at these and it appears they are out of stock. In all fairness I only checked Jegs and Summit. I believe the part number is 70012. Heading to Vegas next month. I might have to focus and squeeze the trigger for 3rd. ;)

PS, The BBB is cool but out of my pay grade.
Chad ,you can buy direct from Turbo Action . Jegs ,Summit and others are not stocking a lot of parts and are drop shipping direct from the manufacturer.
Although the prices might be slightly higher and you'll pay shipping ,at least you can get the part.
I've had to go this route with a lot of parts in the past year.

outlaw 03-18-2021 02:07 PM
Re: Automatic Shifter Options
 
I'm also a fan of B&M pro ratchet.
Terry

Eman 03-18-2021 11:06 PM
Re: Automatic Shifter Options
 
With a forward pattern 3 spd I've messed up the squeezing the lever, the worst is when you ease off the lever and end up pushing it to neutral. I've used the B&M Pro Ratchet and it's a great shifter. Turbo Action is good and does away with squeezing the lever.

Race Clean 03-19-2021 11:41 AM
Re: Automatic Shifter Options
 
Quote:
Originally Posted by steven reynolds (Post 636456)
As I have been told, "make sure all bolts are tight, use the correct levers, shift arms, if you have reverse pattern valve body, make all adjustments in high gear, if this is done right then the rest is right"
That's about all I know about adjusting the shifter itself and it did work for me
Steve
Dug out the instruction sheet for MY PPP today, it clearly states that final adjustments should be done in Second gear. That is on a P-R-1-2-3-N PATTERN


All times are GMT -4. The time now is 03:53 PM.
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.