CLASS RACER FORUM
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Rochester 2bbl help (https://classracer.com/classforum/showthread.php?t=90045)

SS/AM 08-18-2025 06:48 AM
Re: Rochester 2bbl help
 
PSA - What tech doesn't notice, isn't there 😉

nickh 08-18-2025 08:56 AM
Re: Rochester 2bbl help
 
Quote:
Originally Posted by Cglrcng (Post 715453)
You can always find a builder that can make it faster. The secret is sit down with the good book (the rulebook), maybe even a tech that will discuss the prohibited items you cannot touch...then find a builder that will follow the required steps to make it faster and not touch those prohibited areas with a ten ft. pole.

Good luck finding that builder and the hopeful passing of future measurements, etc.
Gary, I know in dirt racing they have a go or no go gauge that they use on the base, not sure if other organizations have that. We ran a Holley 500 2 bbl that was flowing 800 cfm tremendous amount of work done, was I cheating yes but never got caught. AJ Foyt once said you aint cheating until you get caught LOL

Billy Nees 08-18-2025 09:00 AM
Re: Rochester 2bbl help
 
Quote:
Originally Posted by SS/AM (Post 715465)
PSA - What tech doesn't notice, isn't there 😉
Good Luck with that!

SS/AM 08-18-2025 09:13 AM
Re: Rochester 2bbl help
 
Quote:
Originally Posted by nickh (Post 715472)
Gary, I know in dirt racing they have a go or no go gauge that they use on the base, not sure if other organizations have that. We ran a Holley 500 2 bbl that was flowing 800 cfm tremendous amount of work done, was I cheating yes but never got caught. AJ Foyt once said you aint cheating until you get caught LOL
It's tech's job to determine legality, why I lost interest in "Stock" Eliminator long ago, it's more about what you can away with, rather than good engine building.

SS/AM 08-18-2025 09:19 AM
Re: Rochester 2bbl help
 
Quote:
Originally Posted by Billy Nees (Post 715473)
Good Luck with that!
Let's see non-approved billet crankshafts in SS/GT winning class at INDY, non approved aftermarket aluminum heads on a combo that only allows the OE head winning class at INDY.

Billy for NHRA Tech Director!

Billy, Billy, Billy!!

Billy Nees 08-18-2025 10:52 AM
Re: Rochester 2bbl help
 
Quote:
Originally Posted by SS/AM (Post 715475)
Billy for NHRA Tech Director!
No thanks! I can think of plenty of other thankless jobs that I'd rather have before that one.

Frank Castros 08-18-2025 09:46 PM
Re: Rochester 2bbl help
 
Quote:
Originally Posted by SS/AM (Post 715465)
PSA - What tech doesn't notice, isn't there 😉
It apparently may be a surprise to you, but some of the members of the Tech Dept. also read this stuff.

Mark Yacavone 08-18-2025 10:21 PM
Re: Rochester 2bbl help
 
I don't see why you couldn't use Holley jets. Fuel metering modifications have always been legal...But why ? Rochester jets are available online, several places.
You know, the ones that have the actual orifice size on the sides :-)

SS/AM 08-19-2025 12:46 PM
Re: Rochester 2bbl help
 
Quote:
Originally Posted by Frank Castros (Post 715516)
It apparently may be a surprise to you, but some of the members of the Tech Dept. also read this stuff.
Of course they do, I provided no detail at all.
What I'd do they'd never catch, because they don't look, and again I care nothing about Stock.

tavirace 08-20-2025 09:43 AM
Re: Rochester 2bbl help
 
This combination has already won the NHRA stock eliminator championship, 1984 , Alan Peters K/S 69 Camaro


All times are GMT -4. The time now is 02:55 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.