CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Dana 60 ring and pinion (https://classracer.com/classforum/showthread.php?t=84749)

SGSST109E 04-29-2023 07:27 AM
Re: Dana 60 ring and pinion
 
Instead of honing the bearings polish the ends of the spool and the pinion with wet/dry paper. I won't take much for the bearings to slide on without pressing them on.

Glenn Briglio 04-29-2023 12:23 PM
Re: Dana 60 ring and pinion
 
Quote:
Originally Posted by SGSST109E (Post 679753)
Instead of honing the bearings polish the ends of the spool and the pinion with wet/dry paper. I won't take much for the bearings to slide on without pressing them on.
Do you want the bearings you are going to use when finishing slide onto the spool ?


All times are GMT -4. The time now is 11:22 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.