Re: Six cylinder Super Stockers???
 

Lots of AMC's would fit including the almighty 77 Gremlin rated really high for SS @ 160, its 148 for stock. The limiting factor is getting enough fuel to flow out of the old hard to find 2 barrell carbs to run the index @ 12.65 for a PA and 12.50 for a P. You might see a few more if the holley 2 barrell could be used as a replacement carb. My 16 year old son likes the idea of slow SS.

Eric

Eric

Re: Six cylinder Super Stockers???
 

Eric, I forgot the AMC's had a 2 bbl. I used to have a Jeep J-10 with a 258 2bbl. and a 4 speed granny in the floor. Had a CJ with a 304 3 speed, and a Commando 304 with an automatic, all three got 12 mpg lol. The 77 258 is factory rated at 114, NHRA rated at 160hp. That seems pretty steep to me. shipping weight on the Gremlin is 2753 @ a weight brake of 17.21. I was looking up the Carter BBD and it seems to be flow rated at around 280 CFM. Also I agree with your Son, I enjoy seeing cars in the slower classes. Don Jackson

Re: Six cylinder Super Stockers???
 

If you wanted to do a 4 cylinder. You can run SS/ES, SS/FS, or SS/GS
GS is front wheel drive the others are RWD.
If you want the slowest index (13.65) in Superstock, My car is for sale.

Re: Six cylinder Super Stockers???
 

I remember seeing a Buick 252 with the Q-jet running in Super Stock but can't remember what class. The guide has the 252's rated at 165H.P. and in the 19# weight break range. The weight break for SS/PA is 17.00. He must have been running heavy in SS/PA?? Without getting out the rulebook and calculator I didn't think you take that much weight out.

Re: Six cylinder Super Stockers???
 

Sad but true, if you believe Drag racing should be about "everything" should have a place to race in NHRA then you fit the mold for NHRA. They might just make a class for you to race bracket program at their events too. I can appreciate the interest in a "unique" 6 car but wouldnt it be neat to fit a class they have already? instead of being one of a kind. It would be a shame to have no competitor to compare your results or challenge you to be the fastest.Comp would seem more appropriate so Carbs etc can be used as needed.

Re: Six cylinder Super Stockers???
 

I for one am glad they have some place for "non traditional" combos. Yeah I know all I really have is a very slow comp car. For me it's an affordable way to play, add in the fact that pulling a head, pan, rod, ect. isn't my idea of a good time. I admire the ones that do it just not my cup of tea.

Re: Six cylinder Super Stockers???
 

Yeah, how exciting would Stock or S/S be if there was nothing but 69 Camaros with 350s in them at the track?

Re: Six cylinder Super Stockers???
 

The Pontiac Sprint motors - OHC inline 6's, were offered 4 years. 66-67 were 230 cube and 68-69 were 250 cube. Came with quadrajet and cast iron dual header. Heavy motors! Were only in Tempest and Firebirds.
The motors would really run well and rev... But parts are about impossible to find now. No one really cared about a little OHC 6 back in the 60's, with the 389 - 400 - 455 offerings. I would love to see one of these in stock or ss, but you would have to custom build about everything I would think. Several people that knew the cars back then, including a couple that personally had them, told me the OHC 6 cars would outrun the 326 cars easily back then. Was a few years before my time for first hand experience.

My 67 Firebird Convertible was an original Sprint car, and I have the OHC motor and 3 speed in the shed. Actually ran this motor on the street for a while when I first got my car together. Was afraid of blowing it up, and pulled it out for a sbc. I took it to a few shows, including a big Pontiac show in Kansas City after putting it together, and got lot of attention, as not many Sprint 6's out there. Especially in a 67 Firebird convertible. I found the car in a field in KS with sunflowers hiding most of it back in 1986. Was in highschool and it took me two years of part time jobs to get it running and painted. Could still find them pretty regular back then.

I have a 400 motor with heads and intake for the 1 year only 67 build... now just need the time and money and... good stocker combo.
Will just keep racing it with the IHRA crate motor set up for now. (unless someone has a spare 400 lol )

Ken