Re: 2011- 2014 V6 mustang allowed in stock
Thanks Tony.
Does the V-6 Mustang come with a 8.8 rear end ? Sounds like the combo needs 4.56 (or higher) gears, 28 inch tall slicks, high stall convertor, and drag springs. Would be great to get the car to run under the index with the factory 6 speed automatic. |
Re: 2011- 2014 V6 mustang allowed in stock
They do have an 8.8.
4.56 with a 4.17 first gear? Good luck! |
Re: 2011- 2014 V6 mustang allowed in stock
Quote:
Is 4.17 the first gear ratio in the 6 spd auto ? If so, 1st shift at 7500 rpm should be at 30-32 mph with a 28 inch slick.. |
Re: 2011- 2014 V6 mustang allowed in stock
Quote:
|
Re: 2011- 2014 V6 mustang allowed in stock
Al,
Kdanner is wright you have to watch what gear you run, my current tire is 28' tall I will be trying a 3.55 and a 3.73 maybe a 4.10 gear with both a 28' and a 29.5 tire just to see what it will gain. there is a lot to the tunes on these cars but it is all positive stuff ,will let you know how I make out ! Tony K. |
Re: 2011- 2014 V6 mustang allowed in stock
Quote:
|
Re: 2011- 2014 V6 mustang allowed in stock
Quote:
Sean |
Re: 2011- 2014 V6 mustang allowed in stock
Quote:
|
Re: 2011- 2014 V6 mustang allowed in stock
There are a lot of cars that are under rated at first ! but it does not matter for as the first guy that goes a second or more under things will start to change adjustments in HP rating, lower index etc. so with that said you have to be a fool to blast the index ! Me personally am happy with 4 to 8 tenths under. just my opinion and you know what they say about opinions !
Tony K. |
Re: 2011- 2014 V6 mustang allowed in stock
Quote:
|
All times are GMT -4. The time now is 11:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.