CLASS RACER FORUM
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Just a point of interest to (https://classracer.com/classforum/showthread.php?t=42876)

Tom Goldman 09-02-2012 05:15 PM
Re: Just a point of interest to
 
I don't know Greg.
The carb replacement on the '70 is good since the Ford's have had it for a replacement for the 4300 for years.... the rest is someone playing the AMC version of Caroll Shelby.
The '68-'69 T/A Javelins also ran the crossram with 2 Holley 600's so I don't know where the Holley 780 comes from on the '68-'69 cars, especially since the hp rating was pretty close with the AFB carb.

gmonde 09-02-2012 10:00 PM
Re: Just a point of interest to
 
since we are the subject of amc's ,i just made a few passes in my new ride with the car being new from the engine block back www.gmondeperformance.com under D/S amx
with some video posted it was worth the wait gmonde

Geerhead55 09-03-2012 01:22 AM
Re: Just a point of interest to
 
Nice videos,, Garrett. The motor sounds great,, launches well,,, good luck and have fun getting it sorted out. Its a great looking car, and I like how you did your gauges and saved the original dash,,, take care.
Danny Durham

super trick 09-03-2012 01:41 AM
Re: Just a point of interest to
 
Quote:
Originally Posted by Billy Nees (Post 344070)
all of you Stock and SS racers and "Dime Rocketeers", go into the NHRA Engine Blueprint specs and check out all of the nice shiney new "gifts" the AMC guys got and forgot to tell us about! 1966 thru 1970 various engines. Some killer "Dime Rockets" there now!

As if the motor hp wasn't already low on these cars now this. Hopefully the AMC racers run fast so they can get some HP on their combos.

Jack McCarthy 09-03-2012 01:42 AM
Re: Just a point of interest to
 
greg same as an individual asking for a combo to be put into the books (with an obviuos HP error) after 25 years and it being granted with little documentation...and look how it effected the class / eliminator qaulifying sheet / ladder sheet and #1 qualifier money....

seriously i just wonder what you could get apporved with a few letters... hell i know a 2.5 second under truck

time to find somewhere else to race this is insanity.
captain jack

Mark Yacavone 09-03-2012 01:57 AM
Re: Just a point of interest to
 
Jack ,That's probably not a dime rocket you have any more, but it sure ran good..You ought to be proud...We know it out here.

skills 09-03-2012 01:17 PM
Re: Just a point of interest to
 
I have a question, I am not a racer just a fan. Is Nhra adding parts making it cheaper or just making things more complicated?

Alex Denysenko 09-03-2012 01:39 PM
Re: Just a point of interest to
 
Quote:
Originally Posted by Tom Goldman (Post 344137)
For those of you who don't know, I've worked for a former AMC dealer for over 37 years , and have worked on the owners,and my own AMX'S since '72 ,so I have a little knowledge about AMC's.
I still have all the factory parts books from '66 thru '76, including the group19 sections, which were only 4 pages....ALL group 19 parts were over the counter, dealer,or owner installed only.
The Edelbrock R4B intake is listed p/n 4488409 and had factory part numbers cast on them for both '69-'69&'70&up engines.
The group19 cam to my knowlege, and I installed quite a few of them, had .477" lift.
The group19 Holley carb,p/n 4885730 was actually a Holley 950cfm 3 bbl,list 3916.
Just imagine if that carb was approved instead of the 780 !
Also available were 4bolt main blocks, and even a 8 quart oil pan P/N 4485741.
While I'd love to see what can be done with these new parts, and I'm really glad to see the 4300 Motorcraft carb superceeded, only the surface was scratched with regards to potential without these parts.
Absolutely freaking amazing, there are what? maybe half a dozen nashes that can take advantage of these parts? For the better part of ten years I have been trying to get a legitimate Autolite to Holley FoMoCo carb supercession approved year after year DENIED at every juncture by every official. So why would NHRA all of the sudden embrace a dead car company? Who next? Studebaker? I wonder ifBeth's uncle Leonard still has that old Avanti tucked away in his barn?

Billy Nees 09-03-2012 02:34 PM
Re: Just a point of interest to
 
Quote:
Originally Posted by Alex Denysenko (Post 344288)
For the better part of ten years I have been trying to get a legitimate Autolite to Holley FoMoCo carb supercession approved year after year DENIED at every juncture by every official.
I guess that we just ain't kissin' the right butts there Buddy!

Ed Fernandez 09-03-2012 07:04 PM
Re: Just a point of interest to
 
Quote:
Originally Posted by Greg Hill (Post 344142)
Tom, so I guess I should ask for all the trans am parts that were in the Chevy parts book in 1970 and 1971. It seems to me that I remember something in the rule book saying that special dealer only installed parts were not legal. I know that in 1969 the cross ram manifold with 2 holleys and the off road cam was available on the Z28 from the factory in the trunk and yet that has never been legal. Where does all this bs come from?
Yeah geez Greg.Poor old Chevrolet is getting a real screwing.They've never gotten bone tossed out to them over the years by those mean old NHRA baboons.Call in the lawyers.


All times are GMT -4. The time now is 05:53 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.