Re: Gloves and trans shields
 

Ed, as long as the area inside of the bolt holes is unmodified ,its good . ..Just make sure to keep the SFI tag on it.
I've used a few of them, and you have to trim them to fit the width of the chassis, so trimming down to the block is ok.
I used one on a BROGIE roadster,and the frame rails on those cars are so narrow, a Dedenbear case wont even fit between them without some grinding!

Re: Gloves and trans shields
 

Good info Tom! Thanks!

Re: Gloves and trans shields
 

I thought gloves were already required at 9.99. I learned something new today. ;)