Re: 8.50 index build
Quote:
No, the car won’t be ready for the April race. Summer at the soonest now. The next big project is to wire the car and I need to give it 2 to 3 months. I’ve done a fair amount of wiring, but haven’t tried a from scratch EFI harness, so I wanna take my time to try and avoid any mistakes. |
Re: 8.50 index build
Safe place to store the front end so I can work on the car.
https://i.imgur.com/6z8cNiY.jpg https://i.imgur.com/5uOPqIV.jpg |
Re: 8.50 index build
Been putting it off being a PITA, but got the fire system 90% plumbed...all 1/4" stainless hard line. Just have to mount the nozzles once a couple more fittings come in.
https://i.imgur.com/fpr9jF7.jpg https://i.imgur.com/qBjhbyg.jpg https://i.imgur.com/NGj1cHf.jpg https://i.imgur.com/mIZhHvH.jpg https://i.imgur.com/hYh3hfN.jpg |
Re: 8.50 index build
Last weekend I spent some time building a new wishbone, delay box mount and some other small brackets so I could deliver them to powder coating and anodizing.
https://i.imgur.com/kLnO7lf.jpg https://i.imgur.com/MGGyaJP.jpg https://i.imgur.com/7h3i7JQ.jpg https://i.imgur.com/waiQw0w.jpg |
Re: 8.50 index build
Beautiful!!
|
Re: 8.50 index build
Some more progress this week. Powder coating and anodizing came back.
Inside fire nozzle centered above the transmission. https://i.imgur.com/ElmBcuM.jpg Switzter Dynamics fuel rails anodized very nicely. https://i.imgur.com/0D2lF9r.jpg https://i.imgur.com/wNYUXD8.jpg Custom switch mount, MAC valve mount and delay box mount on the shifter. https://i.imgur.com/fMtDOmQ.jpg https://i.imgur.com/TOOaoSx.jpg Custom pinion sensor mount, Davis Technologies sensor & ring. https://i.imgur.com/J9h3iNG.jpg Wishbone mounted. https://i.imgur.com/a6JxExI.jpg https://i.imgur.com/1ljVecn.jpg Upper fender mounts anodized. https://i.imgur.com/ocEqZO9.jpg https://i.imgur.com/0KCx5zI.jpg Hatch hinge/roof supports. https://i.imgur.com/4IN3DRY.jpg Tim McAmis light weight fuel cell cap anodized. https://i.imgur.com/zsUzsvh.jpg https://i.imgur.com/Ou38X8v.jpg |
Re: 8.50 index build
Preparing to start wiring here soon. The plan is to start in the back and work my way forward. Needed to mock up the shock sensors to wire them, but the shock simulator blocked them from bolting up forcing me to mock up the shocks temporarily. Simulator goes back on as soon as the rear wiring is complete.
https://i.imgur.com/nb4epbm.jpg https://i.imgur.com/eaX58le.jpg https://i.imgur.com/ZXVcEI3.jpg https://i.imgur.com/N41FJpP.jpg |
Re: 8.50 index build
ABSOLUTELY GORGEOUS AND FLAWLESS WORKMANSHIP--- I envy you---FED 387
|
Re: 8.50 index build
Small update on the most recent progress. First off was to prepare to bond the roof supports to the cage. This required stripping the powder coat off to bare metal, yet not damage the powder coat outside of the bond area. Alot harder than it should have been because like a dummy I put the tubs in the car and my access to reach the area was gone now. Had to reach from outside the car making it quite challenging.
https://i.imgur.com/CT5DDFP.jpg https://i.imgur.com/u0fPcvm.jpg https://i.imgur.com/XSgjBFA.jpg https://i.imgur.com/uAj8CoV.jpg https://i.imgur.com/h0Fy8Jr.jpg https://i.imgur.com/XVlQB6n.jpg https://i.imgur.com/2PxbgZo.jpg https://i.imgur.com/L3aF4Fp.jpg https://i.imgur.com/anhTyEi.jpg |
Re: 8.50 index build
Next up was to finish up the parachute. The old chute bag was badly sun faded so I got a new replacement. The aluminum spring can was pretty beat up from the crash so I straightened it as best as I could then had it powder coated in an effort to save it. Lastly, a new chute cable installed.
https://i.imgur.com/NPRXTty.jpg https://i.imgur.com/Y8ymiVS.jpg https://i.imgur.com/5MKhJ29.jpg https://i.imgur.com/WbCKEj9.jpg https://i.imgur.com/rZgL9sq.jpg https://i.imgur.com/krjwJmT.jpg The last few things were to install new door lock cylinders then sandblasting the trunk latch & hardware then installing as well as the trunk lock cylinder. https://i.imgur.com/qugZqbz.jpg https://i.imgur.com/naM1Mu8.jpg https://i.imgur.com/DmUpCxf.jpg https://i.imgur.com/YEQuMN6.jpg https://i.imgur.com/l8J5IO3.jpg |
All times are GMT -4. The time now is 11:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.