CLASS RACER FORUM
Page 14 of 20 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   79 Mustang project U/SA (https://classracer.com/classforum/showthread.php?t=59346)

black88coupe 03-14-2017 01:04 PM
Re: 79 Mustang project U/SA
 
Quote:
Originally Posted by RobbieRacer (Post 529569)
Im making it look like a 79 Cobra. I like the 2 tone paint. It looks much better in the pictures. I'm hoping sanding and buffing helps. Not to bad for my 1st time painting..
Turning out good

black88coupe 03-14-2017 01:06 PM
Re: 79 Mustang project U/SA
 
Quote:
Originally Posted by Dave Muller (Post 529589)
I'm betting sanding and buffing will make a world of difference!
X2! Will definitely make a difference.

S/ST J718 03-14-2017 07:18 PM
Re: 79 Mustang project U/SA
 
Robbie, Looking real good, paint looks good so that shows you did a great job with the prep work. Thanks for the update , hope to see you running the new Arizona Stock / Super Stock Assoc. events....

RobbieRacer 03-15-2017 10:38 AM
Re: 79 Mustang project U/SA
 
Quote:
Originally Posted by S/ST J718 (Post 529629)
Robbie, Looking real good, paint looks good so that shows you did a great job with the prep work. Thanks for the update , hope to see you running the new Arizona Stock / Super Stock Assoc. events....
As soon as the car is running I will be there.:)

RobbieRacer 04-21-2017 11:00 AM
Re: 79 Mustang project U/SA
 
2 Attachment(s)
I thought I would go ahead and post an update.It's been a while. I have made a little headway. I got the dash repaired, painted and installed. I mounted the seats on the factory seat rails. They were too wide at 14 inches but I swapped them from inside to outside and they are only 9 inches wide. I mounted the seats on plate steel then mounted them to the rails. It came out real good. Nice and solid.Also got the brakes done. Nothing fancy but they work. I might up grade them later.

Dave Muller 04-21-2017 11:23 AM
Re: 79 Mustang project U/SA
 
I'm glad to see that there's been some progress.

black88coupe 04-21-2017 12:24 PM
Re: 79 Mustang project U/SA
 
Cool. Good update.

john lemoine 04-22-2017 10:18 PM
Re: 79 Mustang project U/SA
 
what are you using to replace the rubber bushings in upper and lower control arms any part numbers available thanks

RobbieRacer 04-29-2017 09:53 PM
Re: 79 Mustang project U/SA
 
I put in poly bushings. I dont remember the numbers but I found them online.
Quote:
Originally Posted by john lemoine (Post 532837)
what are you using to replace the rubber bushings in upper and lower control arms any part numbers available thanks

RobbieRacer 04-29-2017 10:00 PM
Re: 79 Mustang project U/SA
 
Well today was a good day and a bad day. I had a new windshield installed. But when I put the front rims on I found that they don't clear the SN95 front break calipers. I like my old school rims but I guess ill sell them and get different ones.


All times are GMT -4. The time now is 08:21 PM.
Page 14 of 20 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.