HOME MAGAZINE FORUM RULES SPONSORS CONTACT
     
   
   
 
Go Back   CLASS RACER FORUM > Class Racer Forums > .90 Heads Up Class Racing Tech

Reply
 
Thread Tools Display Modes
Old 02-15-2018, 10:11 AM   #1
jmcarter
VIP Member
 
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 2,535
Default Input needed on Willy’s Restrictor Plate

Need a quick way to knock ~7 tenths off a Super Street car without buying a timer and stop and working to get ratios. Not sure I’ll need those long term anyway so thought the Willy’s housing that has the adjustable plates and mounts under the carb would be a good “cheap and dirty” approach. Any inputs? Thanks
__________________
Jim Carter
2340 Stock
2340 SST/2340 Super Stock
jmcarter is online now   Reply With Quote
Old 02-15-2018, 01:57 PM   #2
Jeff Stout
Senior Member
 
Join Date: Dec 2001
Location: phoenix
Posts: 652
Default Re: Input needed on Willy’s Restrictor Plate

I know a bracket racer that has one on a 10.50 car and loves it. The car stayed very consistent and adjustable to always be fast car in class he runs in. Not sure on how much ET he scrubs off with it.
Jeff Stout is offline   Reply With Quote
Old 02-15-2018, 02:18 PM   #3
Lenny5160
Member
 
Lenny5160's Avatar
 
Join Date: Nov 2015
Location: Inver Grove Heights, MN
Posts: 344
Default Re: Input needed on Willy’s Restrictor Plate

From what I've read, you may or may not be able to kill enough with the Willy's plate. Right on the edge.

EZ Plate will work, but you'll need to carry a variety of plates to dial the car rather than just turning a bolt on the Willy's.
__________________
Tony Leonard
S/ST 5160
S/C 5160
Lenny5160 is offline   Reply With Quote
Old 02-15-2018, 08:38 PM   #4
jmcarter
VIP Member
 
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 2,535
Default Re: Input needed on Willy’s Restrictor Plate

Thanks guys, confirms what I was thinking, hate to kill MPH but if I buy the car I may just unhook the four barrel and see if it will still cut a light and if halfway close use weight to fine tune. This would be a one race deal, guys will be fighting to line up with me first round....get your first round duck right here! If I buy the car will get one of the Sinnett stops and test, test, test.

Thanks again.
__________________
Jim Carter
2340 Stock
2340 SST/2340 Super Stock
jmcarter is online now   Reply With Quote
Old 02-22-2018, 05:46 AM   #5
Robbie Welch
Live Reporter
 
Join Date: Sep 2005
Location: Golden Beach Maryland
Posts: 914
Default Re: Input needed on Willy’s Restrictor Plate

Jim you planning on trying Super Street?
Robbie Welch is offline   Reply With Quote
Old 02-22-2018, 06:35 AM   #6
jmcarter
VIP Member
 
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 2,535
Default Re: Input needed on Willy’s Restrictor Plate

Quote:
Originally Posted by Robbie Welch View Post
Jim you planning on trying Super Street?
It's been known to happen, see my album...linky below

http://classracer.com/classforum/album.php?albumid=577

The Roy Johnson built yellow Duster was the killer car, some success with the full Chassis Avenger most recently before a foray into Stock eliminator. Now working toward a Super Stock legal roller with a Bracket/Super Street motor.

Good luck this weekend!
__________________
Jim Carter
2340 Stock
2340 SST/2340 Super Stock
jmcarter is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:44 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.Ad Management plugin by RedTyger