|
06-09-2010, 09:29 PM | #1 |
VIP Member
Join Date: Jun 2008
Location: New Carlisle OH
Posts: 1,282
Likes: 3
Liked 408 Times in 186 Posts
|
Dragster maintenance
how hard is it to maintenance dragster ? and when buying a used dragster what should I look for ?
__________________
Jake Biermann |
06-09-2010, 10:59 PM | #2 |
Member
Join Date: Mar 2009
Location: Woodinville, WA
Posts: 401
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Dragster maintenance
Maintenance on a dragster is easier than it is on a door car, it's all just right there in the open. But, like any drag car, you need to do a bunch. Tighten everything, check everything else, change fluids, lash valves, etc, etc. The more you check and maintain, the fewer problems you have.
IMHO, you should never buy a used race car without an experienced person along. Cracks in the frame are a big issue, for an example, and having someone along who knows where to look can't hurt. And just what looks good and what doesn't look right. Find a friend who knows what's what and get them to come along.
__________________
Chris Williams 6304 SC, TD, ET |
06-11-2010, 02:13 PM | #3 | |
Senior Member
Join Date: Jul 2007
Location: Nothern IL
Posts: 596
Likes: 1
Liked 1 Time in 1 Post
|
Re: Dragster maintenance
Quote:
__________________
Bill Baer 3391 SC, 339B SC, QR |
|
06-11-2010, 09:37 PM | #4 |
Member
Join Date: Mar 2009
Location: Woodinville, WA
Posts: 401
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Dragster maintenance
Bill's right, I forgot that. Sit in the car. Strap in. With a helmet on. Make sure you can reach and see everything. Can you shift? Are the pedals in a good spot? And stay there for a while. Like 5 minutes. Are you comfortable? Can you get in and out easily?
There are two styles of dragster seating, one more upright and one more "laid back". I can't stand the laid back style, mostly because I'm big and with a helmet on I can't see things as well. But some people love it. A matter of taste. Don't rush this part. Looking cool is one thing, winning is more fun and that requires being comfortable.
__________________
Chris Williams 6304 SC, TD, ET |
06-12-2010, 09:42 AM | #5 |
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,135
Likes: 1,021
Liked 1,689 Times in 537 Posts
|
Re: Dragster maintenance
look underneath does it have scrape marks, these things can hit the surface a lot! check for cracks! at our track last night a dragster broke in half at the finish line. again look for cracks at all welds and attachment points.
__________________
KEITH MAYERS 2 X somebody many X nobody |
07-07-2010, 08:55 AM | #6 |
Junior Member
Join Date: May 2005
Location: Jupiter, FL
Posts: 59
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Dragster maintenance
this thread is good as I will be soon doing the same looking for a used turn key dragster.
What else is good to look for and check? What was provided so far is great. When looking for turn key what else can be checked with the motor n such to try to insure it doesn't blow up on the first pass and to make sure I'm not buying some guys weak motor/trans in his TK car. Does anyone down here live in FL I could use a mentor for moving to a rail. |
07-08-2010, 10:17 AM | #7 |
Senior Member
Join Date: Jul 2007
Location: Nothern IL
Posts: 596
Likes: 1
Liked 1 Time in 1 Post
|
Re: Dragster maintenance
Tweaker
I would suggest that if you buying it turn key that you request to see it make a pass if the car has good MPH the motor is probably OK but there are no guarantees I have seen brand new stuff break on the dyno before ever leaving the shop! As far a mentor goes I’m in Illinois and Chris is in Washington State so the only help we can offer you is by phone or internet but if you have any more specific questions, I (and probably Chris) will try to help you. I would suggest that you stick to the more popular (chevy) stuff as it’s cheaper and more readily available than Ford or Mopar performance stuff. (But if ya gotta have a something different well that your preference, just keep in mind it may cost a little more.) You also might want to look in the NHRA rule book there are a bunch of SFI standards that the car and your protective equipment need to meet and most have expiration dates. Some of these include the Chassis, the seat belts the Trans shield, the flex plate shield, the flex plate, Balancer your clothing, your helmet, your gloves the hydro test date on the co2 bottle. If you going to a driving school ask if it’s possible to get a physical first and get your license passes done at the school.
__________________
Bill Baer 3391 SC, 339B SC, QR |
07-08-2010, 02:30 PM | #8 |
VIP Member
Join Date: Jan 2002
Location: Central Massachusetts
Posts: 1,386
Likes: 628
Liked 391 Times in 85 Posts
|
Re: Dragster maintenance
Ryan Ondrejko's dragster is for sale turn-key! Ready to GO!
|
07-08-2010, 03:16 PM | #9 |
Member
Join Date: Mar 2009
Location: Woodinville, WA
Posts: 401
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Dragster maintenance
All good advice, Bill. And yes, I'm happy to help, as much as someone from the farthest possible point from Florida in the contiguous US can help
__________________
Chris Williams 6304 SC, TD, ET |
07-09-2010, 09:57 AM | #10 |
Junior Member
Join Date: May 2005
Location: Jupiter, FL
Posts: 59
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Dragster maintenance
Thanks a lot guys the information is very helpful. I appreciate it. I wish you guys lived close! lol
|
|
|