|
12-29-2023, 02:41 PM | #1 |
Member
Join Date: Sep 2006
Location: Kilgore TX
Posts: 428
Likes: 5
Liked 70 Times in 38 Posts
|
Who can help with an Olds 350 head?
A fellow has contacted me in question about rebuilding a 1971 Olds Cutlass 350 original engine. He wants to increase the performance within reason. I know the customer and his car and his style so a factory iron head will be the best choice. It there a factory head better that the 1971 350 model? And is such a head easily available. I would like to make him a 400 horse package.
Who is in the know with Olds 350 heads? And for that matter, 350 Olds engines in general. |
12-29-2023, 03:54 PM | #2 |
Senior Member
Join Date: Dec 2001
Location: Elysburg, Pa
Posts: 690
Likes: 281
Liked 224 Times in 89 Posts
|
Re: Who can help with an Olds 350 head?
A good start would be putting in the 2.005" intake to replace the 1.88" and some pocket porting.
|
Liked |
12-29-2023, 04:02 PM | #3 |
Junior Member
Join Date: Mar 2011
Location: Maryland
Posts: 69
Likes: 201
Liked 66 Times in 23 Posts
|
Re: Who can help with an Olds 350 head?
I’d suggest 1968-1969 #5 or 1970 #6 heads. You’re gonna need more than just a head swap to make 400 hp, though. I’d recommend a bit more compression, a respectable cam and valvetrain upgrade, a Performer RPM intake, a decent pair of headers, and a reworked Q-Jet. 400hp is achievable and if maintained and not over revved, should be stout and live quite a long time. You should be fine with a factory crank and rods (reconditioned) at that level.
|
Liked |
12-29-2023, 04:08 PM | #4 | |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,991
Likes: 693
Liked 1,457 Times in 543 Posts
|
Re: Who can help with an Olds 350 head?
Quote:
The best intake is either the Performer RPM or Holley Street Dominator if you can find one. I would also recommend the use of a hydraulic roller with Johnson Lifters, for Pontiac/Oldsmobile applications. The Chevy lifters have the oil band in the wrong location. |
|
Liked |
01-01-2024, 10:23 PM | #5 | |
VIP Member
Join Date: Jan 2002
Location: Central Massachusetts
Posts: 1,383
Likes: 609
Liked 390 Times in 84 Posts
|
Re: Who can help with an Olds 350 head?
Quote:
|
|
01-02-2024, 08:52 AM | #6 |
VIP Member
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,275
Likes: 25
Liked 510 Times in 200 Posts
|
Re: Who can help with an Olds 350 head?
I just watched a video of some dyno testing on a 70 W-31 350 Olds engine
10+ to 1 compression with 2.07 intake valves and the factory aluminum intake with headers It made exactly what the factory rating was 325 hp at 5400 Was a stock cam and freshly rebuilt +.030 engine Could one make 400hp ? Sure but it obviously would take more than just some different factory iron heads !!
__________________
Rich Biebel S/C 1479 |
01-02-2024, 09:57 AM | #7 |
VIP Member
Join Date: Jul 2002
Location: Michigan
Posts: 1,222
Likes: 134
Liked 498 Times in 104 Posts
|
Re: Who can help with an Olds 350 head?
First question you need to know, is this car going to be operating on non-leaded pump fuel? If so, you'll need to use a cylinder head with hardened valve seats. If you want 400+ horsepower out of a 350, I would recommend a set of Edelbrock heads along with an Edelbrock or Holley Dominator intake that can be ported to match the heads. By the time you prep a set of OEM heads, you would be further ahead with the Edelbrocks. Add a set of forged pistons, camshaft that would make power to 6500-7000 and upgraded valve train with beehive springs. Don't forget a good set of 1-3/4" or so headers and free-flowing exhaust. I would use a race-prepped Q-Jet but that's just me. If it's a street car, a minimum of 3.91 rear gear out back will be required.
__________________
Jim Kaekel 3836 STK |
01-02-2024, 12:07 PM | #8 |
Junior Member
Join Date: Jul 2023
Posts: 14
Likes: 0
Liked 9 Times in 3 Posts
|
Re: Who can help with an Olds 350 head?
Olds made a 17 degree alum head for their Diesel block back in the 80's. That head would make a lot of power but they are hard to find. Someone on here that knows Olds better than I could tell you if the stock block & the Diesel have the same bolt pattern.
|
01-02-2024, 12:17 PM | #9 | |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,991
Likes: 693
Liked 1,457 Times in 543 Posts
|
Re: Who can help with an Olds 350 head?
Quote:
The diesel block, although stronger, has a larger main size as the big block Olds. Some racers use spacers in the mains with the small block bearings. There was also a limited run of Olds small block racing blocks that are hard to find. For a low cost small block forged crankshaft, you can use the Olds 330 crankshaft, however, you have to use the corresponding Olds 330 or 425 flexplate. |
|
|
|