307 sbc head - Page 2

Murphy · 02-15-2021, 08:16 PM

I have a set of old S/S ported but not welded 041 heads and was wondering about compression

bubski · 02-15-2021, 08:53 PM

Quote:

Originally Posted by Billy Nees

That one ain't a "Dime Rocket".

Damn right it aint !! better off building a FFFord with a quick fuel carb n sum aluminium heads 2 points higher squeeze n a few horsepower more rating !! 307 is not for the meek !!

Rich Biebel · 02-15-2021, 09:28 PM

"scraping your heads with a spokeshave to get to the proper cc's is a pain in the Arse for sure !! "

On an angle would get them CC's down but not with a "spokeshave"...lol

I'm going with the 85B ....

jimmyparker · 02-16-2021, 09:19 AM

Quote:

Originally Posted by Billy Nees

Why would anyone in their right-mind be asking about 307 head castings???

I was pitted next to some guy with a 307 Nova in Gainesville a few years ago and he only had one header on the car??

1347 · 02-16-2021, 11:16 AM

Quote:

Originally Posted by jimmyparker

I was pitted next to some guy with a 307 Nova in Gainesville a few years ago and he only had one header on the car??

I think Billy knows that guy 🤣🤣

Billy Nees · 02-16-2021, 11:33 AM

Quote:

Originally Posted by Murphy

I have a set of old S/S ported but not welded 041 heads and was wondering about compression

An 041 head is a 350 head. Are you asking about putting an 041 head on a 307? If you are, then it would wind up being pretty much the same as a 73/307.

Murphy · 02-16-2021, 12:51 PM

That is what I was looking for

Murphy · 02-16-2021, 01:09 PM

Trying to get a estimate of what the compression might be small chambers 1970 block

Billy Nees · 02-16-2021, 01:30 PM

You might end up with about 8.5-1. If I might make a suggestion? Put a 305 head on it. Even a small valve 305 head would make for a nicer driver than the 041 head.

Murphy · 02-16-2021, 03:02 PM

Already have the 041 head and might build something a little bigger later the 307 has a lot of miles on it

02-15-2021, 08:16 PM	#11
Murphy Junior Member Join Date: Apr 2003 Posts: 45 Likes: 15 Liked 1 Time in 1 Post	Re: 307 sbc head I have a set of old S/S ported but not welded 041 heads and was wondering about compression

02-15-2021, 09:28 PM	#13
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,275 Likes: 25 Liked 510 Times in 200 Posts	Re: 307 sbc head "scraping your heads with a spokeshave to get to the proper cc's is a pain in the Arse for sure !! " On an angle would get them CC's down but not with a "spokeshave"...lol I'm going with the 85B .... __________________ Rich Biebel S/C 1479

02-16-2021, 12:51 PM	#17
Murphy Junior Member Join Date: Apr 2003 Posts: 45 Likes: 15 Liked 1 Time in 1 Post	Re: 307 sbc head That is what I was looking for

02-16-2021, 01:09 PM	#18
Murphy Junior Member Join Date: Apr 2003 Posts: 45 Likes: 15 Liked 1 Time in 1 Post	Re: 307 sbc head Trying to get a estimate of what the compression might be small chambers 1970 block

02-16-2021, 01:30 PM	#19
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,223 Likes: 3,103 Liked 6,791 Times in 1,524 Posts	Re: 307 sbc head You might end up with about 8.5-1. If I might make a suggestion? Put a 305 head on it. Even a small valve 305 head would make for a nicer driver than the 041 head. __________________ Billy Nees 1188 STK, SS World's greatest Under-Achiever!

02-16-2021, 03:02 PM	#20
Murphy Junior Member Join Date: Apr 2003 Posts: 45 Likes: 15 Liked 1 Time in 1 Post	Re: 307 sbc head Already have the 041 head and might build something a little bigger later the 307 has a lot of miles on it