|
11-08-2017, 10:46 PM | #1 |
Member
Join Date: Mar 2007
Posts: 346
Likes: 19
Liked 20 Times in 15 Posts
|
318 poly
Anyone try this combo with 2 BBL in a 60's car? Still has original factory HP. Way more than the LA 318.
|
11-09-2017, 02:41 AM | #2 |
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,517
Likes: 2,206
Liked 1,776 Times in 569 Posts
|
Re: 318 poly
It would be a nightmare.....What is it 230HP or so?
I race a 63 Belv. 318 poly with 2 fours in AHRA Formula Stock back in the day that I traded straight across for a set of Max Wedge Heads to Burbank Speed in the early 70s. It ran in the mid 12s. A 2 Brl. 318 would not stand a chance against our 318 Thermoquad O/SA Wagon which is at 230 HP!
__________________
John Irving 741 Stock 741 Super Stock |
11-09-2017, 03:09 AM | #3 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 692
Likes: 2,222
Liked 217 Times in 104 Posts
|
Re: 318 poly
230 with a thermoquad ?!?!
__________________
Dave Noll, E/FS ,L/SA 6526 |
11-09-2017, 08:44 AM | #4 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 1,979
Likes: 52
Liked 704 Times in 176 Posts
|
Re: 318 poly
If you take 45 hp off like the LA engines, it would be reasonable to consider.
__________________
|
11-09-2017, 08:48 AM | #5 |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,212
Likes: 3,066
Liked 6,730 Times in 1,512 Posts
|
Re: 318 poly
2V polys are at 195.
__________________
Billy Nees 1188 STK, SS Make tech "TECH" again! |
11-09-2017, 12:45 PM | #6 |
Senior Member
Join Date: Jul 2014
Posts: 557
Likes: 29
Liked 46 Times in 31 Posts
|
Re: 318 poly
Finding a cam for one would be a nightmare, but they are solids and adj rockers. Read of a builup on one of these engines, a little head work, cam and good intake, made over 500 hp. Briggs and Stratton valves in them.
|
11-09-2017, 03:33 PM | #7 |
Senior Member
Join Date: Dec 2001
Location: Elysburg, Pa
Posts: 689
Likes: 279
Liked 223 Times in 88 Posts
|
Re: 318 poly
The 62 4 barrel would be great if it were rated around 220. Other than the lifter layout for the canted valves, the shortblock is no different than an LA 318 or 340, it uses the same AFB as the 361/305 with 1.84/1.56 valves and these engines can be had for free although the mani is usually few hundred. Find a clean 62 Dodge or Plymouth 2 or 4 dr and have fun.
|
11-09-2017, 10:19 PM | #8 |
Member
Join Date: Mar 2007
Posts: 346
Likes: 19
Liked 20 Times in 15 Posts
|
Re: 318 poly
I was thinking of the 2 bbl combo in a A body. Well tuned that combo produces a strong torque curve. With a B&B motor and a stocker cam???? How easy to convince NHRA for a 318 LA rating?
|
11-09-2017, 11:28 PM | #9 |
Senior Member
Join Date: Dec 2001
Location: Elysburg, Pa
Posts: 689
Likes: 279
Liked 223 Times in 88 Posts
|
Re: 318 poly
|
11-09-2017, 11:52 PM | #10 |
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,517
Likes: 2,206
Liked 1,776 Times in 569 Posts
|
Re: 318 poly
No A body poly 318 every produced.
__________________
John Irving 741 Stock 741 Super Stock |
Thread Tools | |
Display Modes | |
|
|