|
10-14-2020, 03:17 PM | #11 | |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,991
Likes: 693
Liked 1,457 Times in 543 Posts
|
Re: Rivets: Steel or Aluminum?
Quote:
|
|
Liked |
11-27-2022, 11:14 AM | #12 |
Junior Member
Join Date: Nov 2022
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Rivets: Steel or Aluminum?
The longevity of metal cases largely depends on the corrosion resistance of the product's materials. An oxide film forms on the surface of aluminum sheets immediately after they leave the forming line. Its presence protects the metal against corrosion traces due to high humidity and prolonged contact with water. Steel is much inferior to aluminum in terms of corrosion resistance. Therefore, chromium and nickel are added to such raw materials at the melting stage, which turns the alloy into stainless steel. Nevertheless, I would give preference to steel materials. For example, I recently bought one at https://www.scrooz.com.au/hardware/joist-hangers/.
|
11-28-2022, 11:16 AM | #13 |
VIP Member
Join Date: Apr 2012
Location: Connecticut
Posts: 1,110
Likes: 1,166
Liked 660 Times in 283 Posts
|
Re: Rivets: Steel or Aluminum?
You can put a little aluminum paint/primer in the hole. Outside too, if you don`t mind it. Then wipe it neatly.
|
Liked |
11-29-2022, 09:53 AM | #14 |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,991
Likes: 693
Liked 1,457 Times in 543 Posts
|
Re: Rivets: Steel or Aluminum?
|
Liked |
|
|