Qjet problem!!!!!!!!!!!!

Lyn Smith · 05-21-2007, 05:12 PM

Got a hesitation bobble at the top of first gear. I still have the power valve and rods in the carb. Would taking them out help the problem? What are the pros and cons of taking it out be? Thanks Lyn

Lyn Smith

alan junkerman · 05-21-2007, 09:50 PM

first of all, what kind and size fuel pump and size fuel line are u running?

Mike Pearson · 05-22-2007, 10:17 AM

Check the air flap on the secondary. it could be open to far causing a lean pop. should measure 1.380 from the choke horn. also close in around the secondary metering rod holes in the gasket with electrical tape. I also run a 90 degree sparlk plug boot on the main vent tube to stop any splash. Check to make sure that your fuel flow at the carb is a gallon in about 20 seconds.

05-21-2007, 05:12 PM	#1
Lyn Smith VIP Member Join Date: Dec 2001 Location: Pontiac,il. Posts: 1,137 Likes: 234 Liked 881 Times in 165 Posts	Qjet problem!!!!!!!!!!!! Got a hesitation bobble at the top of first gear. I still have the power valve and rods in the carb. Would taking them out help the problem? What are the pros and cons of taking it out be? Thanks Lyn Lyn Smith

05-22-2007, 10:17 AM	#3
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,349 Likes: 555 Liked 1,699 Times in 519 Posts	Check the air flap on the secondary. it could be open to far causing a lean pop. should measure 1.380 from the choke horn. also close in around the secondary metering rod holes in the gasket with electrical tape. I also run a 90 degree sparlk plug boot on the main vent tube to stop any splash. Check to make sure that your fuel flow at the carb is a gallon in about 20 seconds. __________________ Mike Pearson 2485 SS

05-21-2007, 09:50 PM	#2
alan junkerman Junior Member Join Date: Nov 2006 Posts: 18 Likes: 0 Liked 0 Times in 0 Posts	first of all, what kind and size fuel pump and size fuel line are u running?