|
10-11-2018, 07:59 AM | #11 |
Senior Member
Join Date: Sep 2016
Posts: 838
Likes: 150
Liked 276 Times in 151 Posts
|
Re: Weight box options?
How about steel flat bars as an option? Two 1/2" threaded rods mounted and stack up multiple pieces as needed.
|
10-11-2018, 09:55 AM | #12 |
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 1,778
Likes: 70
Liked 400 Times in 191 Posts
|
Re: Weight box options?
|
10-11-2018, 10:01 AM | #13 |
Senior Member
Join Date: Aug 2006
Location: Pukwana SD
Posts: 858
Likes: 555
Liked 97 Times in 47 Posts
|
Re: Weight box options?
|
10-11-2018, 12:56 PM | #14 |
VIP Member
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 236 Times in 127 Posts
|
Re: Weight box options?
A friend who runs a 390 Mustang did this. Just bolted on steel plates until he had enough weight to move out of the cars natural class that he shared with Brad Burton.
__________________
Dale Shearon 68 Mustang 6394 |
10-11-2018, 01:37 PM | #15 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,417
Likes: 2,582
Liked 4,453 Times in 1,694 Posts
|
Re: Weight box options?
Quote:
But one needs a weight box for the ability to fine tune. Look at the scale variation that occurred last week.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
|
10-11-2018, 02:56 PM | #16 |
Senior Member
Join Date: Sep 2016
Posts: 838
Likes: 150
Liked 276 Times in 151 Posts
|
Re: Weight box options?
Have to disagree here. No welding required unless it's mounted as permanent ballast. As removable ballast, plain nuts to secure are fine. Iv'e used 10 lb bars to fine tune quite easily.
|
10-11-2018, 03:34 PM | #17 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,417
Likes: 2,582
Liked 4,453 Times in 1,694 Posts
|
Re: Weight box options?
Quote:
The way I remember it, weight attached to frame is considered permanent i.e. welded. Removable weight goes in the box. Now, just because you've been doing it your way, doesn't mean a whole helluva lot as of late. ;-)
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
|
10-11-2018, 03:44 PM | #18 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,417
Likes: 2,582
Liked 4,453 Times in 1,694 Posts
|
Re: Weight box options?
Just checked with a preeminent NHRA tech man.
Nuts have to be tack welded on ballast attached to the frame.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
10-11-2018, 05:09 PM | #19 |
Senior Member
Join Date: Sep 2016
Posts: 838
Likes: 150
Liked 276 Times in 151 Posts
|
Re: Weight box options?
My rule book says: Removable weight must be securely mounted to the frame or frame structure by a minimum of two 1/2" diameter steel bolts per 100 lbs, or one 3/8" steel bolt per 5 lbs, all other weight bars, pucks, etc. must use 1/2" diameter SAE grade 8 bolts for attachment. Every Comp car or Pro Stocker has multiple places to bolt weight in and the nut has no weld.
|
10-11-2018, 05:26 PM | #20 |
VIP Member
Join Date: Jun 2006
Posts: 3,349
Likes: 328
Liked 280 Times in 150 Posts
|
Re: Weight box options?
if you really want to be safe use double nuts or NYLOK nuts on each bolt/stud where you are using removable weights--- you can also use bolts with a hole drilled in it and put a spacer(few washers) run the nut down tight then put a hairpin clip(cotter pin) thru the hole to keep the nut from backing off--REALLY -If you follow NHRA guidelines and use the required bolts etc. you should be OK do not understand why they do/would not accept that method ------weight boxes are for "loose"" ballast like bags of lead shot, loose lead bars etc.iron pieces--.not something that is "securely" fastened down
|
|
|