Solid Body Mount Bushings

Joe Marcinowski · 07-09-2007, 05:31 PM

Installing CE solid bushings in my 78 Camaro. They say to invert the upper bushing that you replaced and use it as the lower. There is a steel sleeve that prevents the rubber part of the bushing from contacting the frame which prevents the frame from tightning up on the body. Trim the steel sleeve, or use a shorter bolt with a washer and bolt it up solid?

Joe Marcinowski
3377 I/SA

Mike Savelle · 07-10-2007, 07:29 AM

shorter bolts and a nice thick washer works well . Mike

Joe Marcinowski · 07-11-2007, 06:10 PM

Mike,
Thank you for the response.
Later,
Joe

07-09-2007, 05:31 PM	#1
Joe Marcinowski Member Join Date: Nov 2005 Location: Northern Ohio Posts: 201 Likes: 684 Liked 33 Times in 15 Posts	Solid Body Mount Bushings Installing CE solid bushings in my 78 Camaro. They say to invert the upper bushing that you replaced and use it as the lower. There is a steel sleeve that prevents the rubber part of the bushing from contacting the frame which prevents the frame from tightning up on the body. Trim the steel sleeve, or use a shorter bolt with a washer and bolt it up solid? Joe Marcinowski 3377 I/SA __________________ Joe Marcinowski 3377 STK

07-10-2007, 07:29 AM	#2
Mike Savelle Member Join Date: Dec 2001 Location: Ontario Canada Posts: 358 Likes: 100 Liked 6 Times in 4 Posts	Re: Solid Body Mount Bushings shorter bolts and a nice thick washer works well . Mike

07-11-2007, 06:10 PM	#3
Joe Marcinowski Member Join Date: Nov 2005 Location: Northern Ohio Posts: 201 Likes: 684 Liked 33 Times in 15 Posts	Re: Solid Body Mount Bushings Mike, Thank you for the response. Later, Joe __________________ Joe Marcinowski 3377 STK

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode