|
09-11-2012, 07:44 PM | #11 |
Senior Member
Join Date: Sep 2004
Location: Cumming,Ga. USA
Posts: 967
Likes: 36
Liked 60 Times in 12 Posts
|
Re: Quadrajet Gasket and tuning
Ahh... Now you have THE MAN involved ! ^^^^
What size lines do you have and what reg are you using ? You should call Deano. Danny has great stuff too.
__________________
2894 STK |
09-11-2012, 07:51 PM | #12 |
Member
Join Date: Mar 2002
Location: West Chester, PA
Posts: 271
Likes: 1
Liked 4 Times in 1 Post
|
Re: Quadrajet Gasket and tuning
Assuming the fuel delivery checks out, the high-speed bypass tubes can be drilled out to richen the top end only. Danny Ashley may have already done this for you, but you should ask if it was done, and if so, to what size.
After making this change, you may need to use leaner secondary metering rods.
__________________
Tony Curcio 1860 STK |
09-11-2012, 08:51 PM | #13 |
Member
Join Date: Sep 2007
Location: Shefford,Qc Can
Posts: 290
Likes: 10
Liked 12 Times in 6 Posts
|
Re: Quadrajet Gasket and tuning
Yes Dean i have a racepack with O2 first gear low 11 then in the 14
I will try what you told me Tony my fuel system is ok |
|
|