|
09-20-2015, 08:35 PM | #1 |
Senior Member
Join Date: Feb 2012
Location: Colorado Springs Colorado/Thousand Oaks Ca
Posts: 606
Likes: 68
Liked 238 Times in 97 Posts
|
Peanut Port Drag Test
For several years I've been building 9.2 compression 467s with 236 peanut port heads, these engines use a 228/238/114 hyd flat tappet cam with a performer RPM intake typical HP was about 517-518 corrected HP, with about 560 TQ. Finally it looks like I will get to test one in my 68 Chevelle, 3720 pounds at a 2130 foot track. My goal is a high 6 sec pass in the 1/8 mile. Some pictures of the build.
Last edited by HP HUNTER; 09-20-2015 at 09:04 PM. |
|
|