C&R chiller fitting

countrypuppy4865 · 07-05-2013, 07:17 PM

Does anybody know what thread size comes on the aluminum C&R chiller fitting. I am trying to determine the proper jiffy tite fittings that I need to go with this.

Signman · 07-06-2013, 07:54 AM

http://www.crracing.com/cr-designed-...ts/the-chiller

Bottom of the page gives part numbers.
8-AN Straight with O-Ring possibly.

Johnny Gray · 07-06-2013, 08:10 AM

This is what I ordered. I order the stuff in 2010 so I don't if any of the numbers changed.
CR-UC-BPC017B check valve number
Fittings
JT-52108
JT-51108
JT-52708-1
JT-51708-1
Hope this helps.

JHeath · 07-06-2013, 10:22 AM

1/2" npt

countrypuppy4865 · 07-06-2013, 03:22 PM

Thanks guys! I already have one setup. I was just trying to determine the jiffy tite fittings I need for the car.

07-05-2013, 07:17 PM	#1
countrypuppy4865 Senior Member Join Date: Nov 2003 Location: Donaldsonville, LA Posts: 966 Likes: 8 Liked 183 Times in 62 Posts	C&R chiller fitting Does anybody know what thread size comes on the aluminum C&R chiller fitting. I am trying to determine the proper jiffy tite fittings that I need to go with this. __________________ Jimmy "Cooter" Hidalgo, Jr. 4865 E/SA '04 GTO 4865 SS/GA '99 Firebird

07-06-2013, 07:54 AM	#2
Signman Member Join Date: Oct 2003 Location: Lower Slower Delaware Posts: 493 Likes: 14 Liked 199 Times in 74 Posts	Re: C&R chiller fitting http://www.crracing.com/cr-designed-...ts/the-chiller Bottom of the page gives part numbers. 8-AN Straight with O-Ring possibly. __________________ Frank Ferrucci ?/SA 1271

07-06-2013, 08:10 AM	#3
Johnny Gray Junior Member Join Date: Mar 2002 Posts: 72 Likes: 15 Liked 40 Times in 6 Posts	Re: C&R chiller fitting This is what I ordered. I order the stuff in 2010 so I don't if any of the numbers changed. CR-UC-BPC017B check valve number Fittings JT-52108 JT-51108 JT-52708-1 JT-51708-1 Hope this helps. __________________ Johnny Gray 1109 STK

07-06-2013, 10:22 AM	#4
JHeath Senior Member Join Date: Jul 2004 Location: Minneapolis Posts: 788 Likes: 2,890 Liked 370 Times in 102 Posts	Re: C&R chiller fitting 1/2" npt __________________ Jerry Heath I/S '93 Cobra FS/J 2010 Mustang "Ebay CJ"

07-06-2013, 03:22 PM	#5
countrypuppy4865 Senior Member Join Date: Nov 2003 Location: Donaldsonville, LA Posts: 966 Likes: 8 Liked 183 Times in 62 Posts	Re: C&R chiller fitting Thanks guys! I already have one setup. I was just trying to determine the jiffy tite fittings I need for the car. __________________ Jimmy "Cooter" Hidalgo, Jr. 4865 E/SA '04 GTO 4865 SS/GA '99 Firebird