Pure stock cutlass build up - Page 4

George W · 12-02-2015, 11:13 AM

Great to see this build back on track

Dan Fahey · 12-07-2015, 12:08 PM

Got any updates?

D

kellintrans · 12-08-2015, 10:55 AM

Here is the 200C tranny waiting to be installed. I will be finally pulling the motor this weekend, and freshening it up over the next couple of weeks. I have also been working on the interior. I am installing a B&M shifter, gauges, tachometer, etc... I will have some pictures soon.

Dan Fahey · 12-08-2015, 11:51 AM

Quote:

Originally Posted by kellintrans

Here is the 200C tranny waiting to be installed. I will be finally pulling the motor this weekend, and freshening it up over the next couple of weeks. I have also been working on the interior. I am installing a B&M shifter, gauges, tachometer, etc... I will have some pictures soon.

COOL !
What ET's are you aiming for?

Dan

kellintrans · 12-08-2015, 01:38 PM

Quote:

Originally Posted by Dan Fahey

COOL !
What ET's are you aiming for?

Dan

Right now, I will be happy to make the 14.55 index for I/PS. But, I think once I get the combo sorted out, it will go low 14's.

nickh · 12-08-2015, 06:56 PM

Just wondering do you have to run the crash bar in the front bumpers and doors or can they be removed?

kellintrans · 02-05-2016, 02:47 PM

Can the front sway bar removed, and if not, can it be left unhooked from the end links?

Dan Fahey · 02-05-2016, 06:44 PM

Quote:

Originally Posted by nickh

Just wondering do you have to run the crash bar in the front bumpers and doors or can they be removed?

So long as it done not hurt the safety of the car you should be ok.

Best to ping Mike Baker.

D

Dan Fahey · 02-05-2016, 06:47 PM

Quote:

Originally Posted by kellintrans

Can the front sway bar removed, and if not, can it be left unhooked from the end links?

You can remove it or unhook the links. Not necessary.
Check Dick Millers web site for Bolt On Traction parts.

Good luck
Dan

12-02-2015, 11:13 AM	#31
George W Junior Member Join Date: Jun 2013 Posts: 57 Likes: 25 Liked 2 Times in 2 Posts	Re: Pure stock cutlass build up Great to see this build back on track

12-07-2015, 12:08 PM	#32
Dan Fahey VIP Member Join Date: Oct 2008 Posts: 2,114 Likes: 1,078 Liked 180 Times in 110 Posts	Re: Pure stock cutlass build up Got any updates? D

12-08-2015, 10:55 AM	#33
kellintrans Junior Member Join Date: Sep 2011 Location: Middletown, DE Posts: 30 Likes: 0 Liked 0 Times in 0 Posts	Re: Pure stock cutlass build up Here is the 200C tranny waiting to be installed. I will be finally pulling the motor this weekend, and freshening it up over the next couple of weeks. I have also been working on the interior. I am installing a B&M shifter, gauges, tachometer, etc... I will have some pictures soon. Attached Thumbnails

12-08-2015, 06:56 PM	#36
nickh Senior Member Join Date: Sep 2010 Location: Houston,Texas Posts: 670 Likes: 1,837 Liked 234 Times in 97 Posts	Re: Pure stock cutlass build up Just wondering do you have to run the crash bar in the front bumpers and doors or can they be removed?

02-05-2016, 02:47 PM	#37
kellintrans Junior Member Join Date: Sep 2011 Location: Middletown, DE Posts: 30 Likes: 0 Liked 0 Times in 0 Posts	Re: Pure stock cutlass build up Can the front sway bar removed, and if not, can it be left unhooked from the end links?