convertor identification

Joe Sprint Bros · 12-04-2008, 10:19 AM

Trying to identify a convertor(GM) for a friend, measures approx 9" and has stampings: BSX-5.125 TB and FO2Z , stamped on the pump side. Any ideas? Thanks, Joe Helms.

Ultimate Converter Concepts · 12-04-2008, 12:04 PM

Quote:

Originally Posted by Joe Sprint Bros

Trying to identify a convertor(GM) for a friend, measures approx 9" and has stampings: BSX-5.125 TB and FO2Z , stamped on the pump side. Any ideas? Thanks, Joe Helms.

Hi Joe, We use a similar ID numbering and lettering for ours. That particular ID looks like either mine or Continental, the B stands for neutral blading on pump side, S would be the stator fin angle or modification, X-5 would be sprag type, .125 couild either be back cut on stator or motor plate thickness (standard GM height + 1/8) depending on where it's stamped, and TB indidcates it has a bushing in pilot for turbine. As far as the F02Z, it could mean that the converter was gone through by another company with different coding ID. So the above coding could be changed. Hope this helps, if I could help you further, I would be more than happy to assist you personally if you want to give me a call at the shop at 203-874-2100. Hope this helps.

Lenny@UltimateTC

Joe Sprint Bros · 12-04-2008, 01:13 PM

Lenny, many thanks, I will pass this info along to the guy so he can contact you. Joe

12-04-2008, 10:19 AM	#1
Joe Sprint Bros Junior Member Join Date: Nov 2004 Location: Virginia, USA Posts: 46 Likes: 0 Liked 0 Times in 0 Posts	convertor identification Trying to identify a convertor(GM) for a friend, measures approx 9" and has stampings: BSX-5.125 TB and FO2Z , stamped on the pump side. Any ideas? Thanks, Joe Helms.

12-04-2008, 01:13 PM	#3
Joe Sprint Bros Junior Member Join Date: Nov 2004 Location: Virginia, USA Posts: 46 Likes: 0 Liked 0 Times in 0 Posts	Re: convertor identification Lenny, many thanks, I will pass this info along to the guy so he can contact you. Joe