Crank trigger p/u

drgrcr1156 · 08-23-2016, 09:36 PM

How can I determine if the crank trigger pickup is going bad? MSD just gives me the ohm range but I did have a bad one last year and it measured with in the spec. I am seeing the same RPM spike on the Racepak graph but this pickup is only a year old. Just want to be sure the spikes are not just noise.

Bob

FED 387 · 08-23-2016, 11:17 PM

The pick up is either good or bad. 60-90 ohms resistance. Make sure wires are twisted AWAY from any other wiring. Try wrapping the pickup wires in alum foil to act as a shield see if that makes a difference . Has the pickup been hit or damaged in any way? If so replace it. Buy spare carry it all times. Replace pickup yearly cheap insurance ce. FED :&7

08-23-2016, 09:36 PM	#1
drgrcr1156 Junior Member Join Date: May 2010 Location: Massachusets Posts: 91 Likes: 0 Liked 2 Times in 1 Post	Crank trigger p/u How can I determine if the crank trigger pickup is going bad? MSD just gives me the ohm range but I did have a bad one last year and it measured with in the spec. I am seeing the same RPM spike on the Racepak graph but this pickup is only a year old. Just want to be sure the spikes are not just noise. Bob

08-23-2016, 11:17 PM	#2
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,349 Likes: 324 Liked 280 Times in 150 Posts	Re: Crank trigger p/u The pick up is either good or bad. 60-90 ohms resistance. Make sure wires are twisted AWAY from any other wiring. Try wrapping the pickup wires in alum foil to act as a shield see if that makes a difference . Has the pickup been hit or damaged in any way? If so replace it. Buy spare carry it all times. Replace pickup yearly cheap insurance ce. FED :&7