Harland Sharp Rockers

Darcy Clarke · 04-17-2012, 11:13 PM

I just wanted to say that the folks at Harland Sharp are awesome to work with they sent me an intake and exhaust rocker with a shaft and hold downs to check the ratio on my engine. Once I check it they will make the ratio to check exactly what is needed. I think this is an awesome service.

Darcy Clarke
6254
A/SA, SS/JA

Ed Wright · 04-17-2012, 11:47 PM

Really nice article in the ND that arrived today about them. They made the first set of roller rockets I ever ownned, way back when my hair was still brown. Nice pieces.

Robert Simpson · 04-18-2012, 07:32 AM

You are correct. Harland did the same for me. Sent me a sample rocker to check on my car then built me a set to my specs. I have the diamond series and I really like what they offer and the effort that they take to help the racers. Plus, I just became a dealer for them. Good people.

Robert

Myron Piatek · 04-18-2012, 11:48 AM

Same here - shipped back & forth a couple times to get my geometry right. I used their rockers for years long ago on a 360 W-2 head bracket car and ran the heck out of them with no issues. Was glad to see IHRA allowing them in Stock a while back and now NHRA!

Tom Goldman · 04-18-2012, 08:25 PM

Just good people and a superior product.
I have a set of Harlan Sharp rockers in an AMC engine I sold over 30 years ago, with thousands of street driving miles on them since, and they were like new when I freshened the engine last year.

Jimmy Smith · 04-18-2012, 11:08 PM

I had a very good experience with Harlan Sharp Co and Randy Jr lots of knowledge and willing to help. A+ Later J.Smith 4621 racing

Jim Wahl · 04-20-2012, 09:43 AM

Quote:

Originally Posted by Myron Piatek

Same here - shipped back & forth a couple times to get my geometry right. I used their rockers for years long ago on a 360 W-2 head bracket car and ran the heck out of them with no issues. Was glad to see IHRA allowing them in Stock a while back and now NHRA!

Myron, do you still use HS rockers now? If not, who's do you use? Can you give me a contact name and # for them. Email me if you think it best. jimwahl@embarqmail.com.

.

Robert Simpson · 04-20-2012, 10:30 AM

Jim, you have a PM.

Robert

Myron Piatek · 04-20-2012, 11:44 AM

Quote:

Originally Posted by Jim Wahl

Myron, do you still use HS rockers now? If not, who's do you use? Can you give me a contact name and # for them. Email me if you think it best. jimwahl@embarqmail.com.
.

Yes, I am using them now. I was happy when IHRA approved aftermarket rockers and switched to Harlan Sharps from the standard Crane ductile iron.

04-17-2012, 11:13 PM	#1
Darcy Clarke Member Join Date: Mar 2008 Posts: 192 Likes: 21 Liked 418 Times in 28 Posts	Harland Sharp Rockers I just wanted to say that the folks at Harland Sharp are awesome to work with they sent me an intake and exhaust rocker with a shaft and hold downs to check the ratio on my engine. Once I check it they will make the ratio to check exactly what is needed. I think this is an awesome service. Darcy Clarke 6254 A/SA, SS/JA

04-17-2012, 11:47 PM	#2
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 389 Times in 168 Posts	Re: Harland Sharp Rockers Really nice article in the ND that arrived today about them. They made the first set of roller rockets I ever ownned, way back when my hair was still brown. Nice pieces. __________________ Ed Wright 4156 SS/JA

04-18-2012, 07:32 AM	#3
Robert Simpson Senior Member Join Date: Aug 2004 Location: Jacksonville, Florida Posts: 803 Likes: 6 Liked 20 Times in 12 Posts	Re: Harland Sharp Rockers You are correct. Harland did the same for me. Sent me a sample rocker to check on my car then built me a set to my specs. I have the diamond series and I really like what they offer and the effort that they take to help the racers. Plus, I just became a dealer for them. Good people. Robert

04-18-2012, 11:48 AM	#4
Myron Piatek VIP Member Join Date: Nov 2001 Location: Florida Posts: 1,538 Likes: 34 Liked 132 Times in 48 Posts	Re: Harland Sharp Rockers Same here - shipped back & forth a couple times to get my geometry right. I used their rockers for years long ago on a 360 W-2 head bracket car and ran the heck out of them with no issues. Was glad to see IHRA allowing them in Stock a while back and now NHRA!

04-18-2012, 08:25 PM	#5
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,435 Likes: 774 Liked 699 Times in 203 Posts	Re: Harland Sharp Rockers Just good people and a superior product. I have a set of Harlan Sharp rockers in an AMC engine I sold over 30 years ago, with thousands of street driving miles on them since, and they were like new when I freshened the engine last year. __________________ Tom Goldman 1500 SG , 1506 STK

04-18-2012, 11:08 PM	#6
Jimmy Smith Junior Member Join Date: Jun 2004 Location: Batesville, Ms. Posts: 33 Likes: 0 Liked 0 Times in 0 Posts	Re: Harland Sharp Rockers I had a very good experience with Harlan Sharp Co and Randy Jr lots of knowledge and willing to help. A+ Later J.Smith 4621 racing

04-20-2012, 10:30 AM	#8
Robert Simpson Senior Member Join Date: Aug 2004 Location: Jacksonville, Florida Posts: 803 Likes: 6 Liked 20 Times in 12 Posts	Re: Harland Sharp Rockers Jim, you have a PM. Robert