Gm Blocks

[Jim Hanig]

I have a mark 4 bowtie never used, and a 402 sleved, lifter bushed, line honed, but not honed. Asking 1800.00 for the bowtie and 750.00 for the 402. plus shipping .Also a set of 840 heads,these heads have been ported and have new valves 500.0, 3, 163 bb intakes 160.0 ea, a set of 215 bb heads a set of 820 heads, several ,375 hp stocker cams,75.0 A new bb 375 replacment intake.A18 degree sb intake ,A set of 5.800 sb alumin rods used, a set of steel 283 5.7 rods new, a set of manley 350 5.7 sportsman rods used 350.00 a set of 6'" manley sportsman rods used,350.00 a set of srp 4.125 pistons new 300.0, 7, 347 flat top pistons used 50.00. anything not priced is open to any offer. Jim Hanig

[grateful sled]

Originally Posted by Jim Hanig

I have a mark 4 bowtie never used, and a 402 sleved, lifter bushed, line honed, but not honed. Asking 1800.00 for the bowtie and 750.00 for the 402. plus shipping .Also a set of 840 heads,these heads have been ported and have new valves 500.0, 3, 163 bb intakes 160.0 ea, a set of 215 bb heads a set of 820 heads, several ,375 hp stocker cams,75.0 A new bb 375 replacment intake.A18 degree sb intake ,A set of 5.800 sb alumin rods used, a set of steel 283 5.7 rods new, a set of manley 350 5.7 sportsman rods used 350.00 a set of 6'" manley sportsman rods used,350.00 a set of srp 4.125 pistons new 300.0, 7, 347 flat top pistons used 50.00. anything not priced is open to any offer. Jim Hanig

interested in the 6" manley rods. please email contact info. to m.kent@comcast.net. thanks.

[Stick Racing]

Does the MK 4 block have the small bore or the big bore?

Andy Stone

[Greg Stump]

If you can send more info and pictures of the 163 intakes,newer 375 intake,and 402 block,it would be appreciated.Thanks,send to racer1258us@yahoo.com

[Jim Hanig]

Originally Posted by Stick Racing

Does the MK 4 block have the small bore or the big bore?

Andy Stone

4.250 bore

[Jim Hanig]

Originally Posted by Greg Stump

If you can send more info and pictures of the 163 intakes,newer 375 intake,and 402 block,it would be appreciated.Thanks,send to racer1258us@yahoo.com

the 402 is a sleved 4bolt 454 bored to 4.185 is lifter bored and line honed ,the work was done at calverts about a year ago never ran. The 163 the older intakes one has the temp hole welded shut , the other one is in good shape. the new one is still in the GM box.

[Stick Racing]

Jim,
I am interested in that block.
Can you give me an e-mail address or phone number please.

Thanks, Andy Stone

[Greg Stump]

Iam interested in the 163 intake.
If I could get the same,,either e-mail or phone?

[Jim Hanig]

Originally Posted by Greg Stump

Iam interested in the 163 intake.
If I could get the same,,either e-mail or phone?

the 402 is sold the bow tie is sold ph 713 826 8176 Houston TX