Air Ride MH problems

Mike Graham · 05-16-2014, 06:03 PM

I have 98 HR on freightliner chassis. The front air bags are very slow to inflate and seem to be low pressure. Is there a pressure regulator in the air bag system? Ride height valves seem to be ok. can someone point me in the right direction?
Mike Graham

Chuck Westcott · 06-04-2014, 10:04 AM

In the 90's many MH builders used a Norgren ride height valve to control air in and air out to beach of the Air bags, Mine went bad and I replaced it. there are 2 relay solenoids one on each side. Mine was located in the front up in the frame rail, I have a picture if you need it.

Mike Graham · 06-04-2014, 10:46 AM

Thanks Chuck. I will check that out.

05-16-2014, 06:03 PM	#1
Mike Graham Member Join Date: Jul 2002 Posts: 385 Likes: 1 Liked 299 Times in 56 Posts	Air Ride MH problems I have 98 HR on freightliner chassis. The front air bags are very slow to inflate and seem to be low pressure. Is there a pressure regulator in the air bag system? Ride height valves seem to be ok. can someone point me in the right direction? Mike Graham

06-04-2014, 10:04 AM	#2
Chuck Westcott Member Join Date: Dec 2003 Location: Brownsburg,Indiana Posts: 326 Likes: 0 Liked 0 Times in 0 Posts	Re: Air Ride MH problems In the 90's many MH builders used a Norgren ride height valve to control air in and air out to beach of the Air bags, Mine went bad and I replaced it. there are 2 relay solenoids one on each side. Mine was located in the front up in the frame rail, I have a picture if you need it. __________________ Chuck Westcott- S/C -S/G 225

06-04-2014, 10:46 AM	#3
Mike Graham Member Join Date: Jul 2002 Posts: 385 Likes: 1 Liked 299 Times in 56 Posts	Re: Air Ride MH problems Thanks Chuck. I will check that out.