|
07-28-2018, 08:37 PM | #1 |
Senior Member
Join Date: Jul 2014
Posts: 563
Likes: 34
Liked 47 Times in 32 Posts
|
Lenco trans
Not sure if this is the right place to ask but there's some knowledgeable guys on here so My question, I looking to put a "used" 4 speed Lenco in my steet strip car and not sure what to stay away from or what to look for.
thanks, Mike |
07-29-2018, 01:24 PM | #2 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,437
Likes: 778
Liked 702 Times in 205 Posts
|
Re: Lenco trans
my experience with Lenco's is from the distant past . I can tell you that the clutch discs and sprags for early Lencos are not easy to find anymore.
Also setting the towers to give a acceptable shift for street driving could be an issue. For a ProStreet car it might be livable. ...Definatly has the WOW factor. Might find more input from the Comp Forum if there are any old timers left on there, Lenco's have been mostly obsolete for at least the last 25 years or more for conventional door cars.
__________________
Tom Goldman 1500 SG , 1506 STK |
07-29-2018, 11:37 PM | #3 | |
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 551
Likes: 269
Liked 228 Times in 78 Posts
|
Re: Lenco trans
Quote:
|
|
07-30-2018, 12:08 AM | #4 |
Member
Join Date: Dec 2010
Posts: 291
Likes: 2
Liked 26 Times in 19 Posts
|
Re: Lenco trans
Do you have the Lenco? There are people out there, that have that answers, just go know where to find them. If you got the Lenco, put it in and see what you got. Very durable, and I would call Lenco, they might be able to give you some info. I usually go to certain racers at the track that run them.
|
07-30-2018, 12:12 AM | #5 |
Member
Join Date: Dec 2010
Posts: 291
Likes: 2
Liked 26 Times in 19 Posts
|
Re: Lenco trans
Racer from division 5 last year won super gas division championship, and he had a lenco 4 speed in his Camaro
|
07-30-2018, 12:50 AM | #6 |
Member
Join Date: Dec 2010
Posts: 291
Likes: 2
Liked 26 Times in 19 Posts
|
Re: Lenco trans
I usually walk thru top sportsman's staging lanes and see who runs them. Most guys run it behind a convertor. Watched a top alcohol dragster couple of years ago, yearvdown and inspect and put back together his transm. And they showed me what to look gor
|
07-30-2018, 01:22 AM | #7 |
Member
Join Date: Dec 2010
Posts: 291
Likes: 2
Liked 26 Times in 19 Posts
|
Re: Lenco trans
Sprags can be expensive if you need them, just don't k ow your budget.
|
07-30-2018, 12:26 PM | #8 |
Senior Member
Join Date: Jul 2014
Posts: 563
Likes: 34
Liked 47 Times in 32 Posts
|
Re: Lenco trans
Don't have anything yet, I wanna buy once. A lot of good answers so far, should be some good ones still laying around in the attic.
Mike |
|
|