|
11-27-2016, 05:22 PM | #1 |
Member
Join Date: Jul 2007
Location: Pottstown,Pa.
Posts: 121
Likes: 24
Liked 11 Times in 8 Posts
|
Cam Info
I am working on a small block Chevy, and looking for some camshaft information.I removed a solid lifter cam, with numbers stamped on the back. 290 06
CD 300 263 Competition NN 8337 Think it is a Cam Dynamics, tried searching the internet but found no info. Anyone have a old catalog that might have some specs? Looks like about .522 lift by measuring a intake lobe. Thanks |
11-29-2016, 12:11 PM | #2 |
Junior Member
Join Date: Oct 2008
Location: Williamstown, NJ
Posts: 31
Likes: 2
Liked 0 Times in 0 Posts
|
Re: Cam Info
Since no one else has replied I can only offer information from CD Catalog Vol. V from 1980: The only grind that comes close is Part No. 20871, Grind No. S-290 300-06 which is 290/300 degrees duration at ramp, 255/265 degrees duration @ .050", .540/.562 lift, .026 lash int/exh. It would appear that the grind no. is simply the intake ramp duration, exhaust ramp duration, intake centerline (in this case 106 degrees). This grind is listed as a competition solid lifter cam. Not sure what the 263 is! Hope this helps!
|
11-29-2016, 12:46 PM | #3 |
VIP Member
Join Date: Jun 2006
Posts: 3,349
Likes: 324
Liked 280 Times in 150 Posts
|
Re: Cam Info
You might try Comp Cams see if they can help otherwise I ebelieve Crane Ca
ms Or some if its employees took over CD. Fed 387 |
11-29-2016, 02:20 PM | #4 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: Cam Info
Crane bought Cam Dynamics back in the 80's . They can still grind you all the old CD cams . I would give Crane a call !
|
12-01-2016, 08:24 PM | #5 |
Member
Join Date: Jul 2007
Location: Pottstown,Pa.
Posts: 121
Likes: 24
Liked 11 Times in 8 Posts
|
Re: Cam Info
Thanks
|
|
|