12 bolt KTRE rear end , f-body '93-'02, complete

Bernie Cunningham · 12-19-2009, 06:18 PM

This is a KTRE housing with Moser spool and axles, 4.88 pro gears with less than 100 runs. All the factory brackets and a drive shaft yoke(missing 1 u-bolt), powder coated. Large 'Ford type' axle bearings, aluminum rear cover, large 5/8" diameter wheel studs, nuts and spacers. NO BRAKES, it does have SS clips for the brake lines. From the outside of the axle flanges it measures 64.5" and from the axle tube ends it measures 58.75"
Removed from a Stock Eliminator car 7 years ago to go super lightweight MW stuff.
$1490.00
Bernie, bonzaproducts@att.net, 951 684 8113 or cell 909 496 0485

12-19-2009, 06:18 PM	#1
Bernie Cunningham Senior Member Join Date: Jun 2002 Location: Southern California Posts: 558 Likes: 23 Liked 52 Times in 17 Posts	12 bolt KTRE rear end , f-body '93-'02, complete This is a KTRE housing with Moser spool and axles, 4.88 pro gears with less than 100 runs. All the factory brackets and a drive shaft yoke(missing 1 u-bolt), powder coated. Large 'Ford type' axle bearings, aluminum rear cover, large 5/8" diameter wheel studs, nuts and spacers. NO BRAKES, it does have SS clips for the brake lines. From the outside of the axle flanges it measures 64.5" and from the axle tube ends it measures 58.75" Removed from a Stock Eliminator car 7 years ago to go super lightweight MW stuff. $1490.00 Bernie, bonzaproducts@att.net, 951 684 8113 or cell 909 496 0485 __________________ Bernie Cunningham 7053 STK Last edited by Bernie Cunningham; 12-19-2009 at 06:24 PM.