|
![]() |
#1 |
Junior Member
Join Date: Aug 2016
Posts: 43
Likes: 12
Liked 6 Times in 5 Posts
|
![]()
Do any of you guys run a fan-type Remote Transmission Cooler? If so, What Brand and Part Number?
I have a Rossler TH400 with a Chance 5500 RPM 9" Converter. 1970 442 Car weighs approx. 3500 lbs. I've spoken:confused to Derale and they only gave me "1" Option; their # 65861....They said I need to run this Cooler and that's it.....no other choices. I would try to go with this Cooler, but it is 8-1/2" tall!...Having a tough time of finding a way to mount it under the rear of the Car, without it "hanging down" too low. Any thoughts/recommendations would be appreciated. ![]() |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 237 Times in 127 Posts
|
![]()
They are trying to sell you the King Kong of trans coolers at $450 bucks. That is a 750 cfm fan in that thing. They make several remote coolers that have 450 cfm fans for under $200. They are all less than 5 inches thick and should do you fine. The C4 on my Mustang runs hot. I have a 10 by 12 thin fin thing with an 8 inch 400 cfm fan behind it between the grill and radiator. Works fine.
If the smaller remote won't cool enough you can use long round finned coolers as connectors. The only real difference is a remote is sealed up good to be used flat. They are all closed systems. If not, someone will let you know.
__________________
Dale Shearon 68 Mustang 6394 |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jan 2011
Location: Hays, KS
Posts: 379
Likes: 226
Liked 70 Times in 31 Posts
|
![]()
I don't understand a need for a trans cooler. I run 3 classes with mine in late rounds (when I'm lucky) and I don't have a cooler. I've never seen over 200 degree trans temps. I changed my fluid at the end of last season after two years and the fluid looked like it did when I put it in.
__________________
Darrel Goheen 785-623-7021 Stock Eliminator 585 94 Camaro Z/28 LT1/ET 585 67 Chevelle 427 Tehnician for JustAnswer.com Last edited by Darrel Goheen; 05-28-2021 at 12:19 AM. |
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 4,196
Likes: 2,136
Liked 2,933 Times in 900 Posts
|
![]()
Darrel is correct, you need to monitor trans temperature for consistency sake so run a good braided bypass loop and you’ll have one less thing to possibly go wrong. I carry a very compact leaf blower just in case.
__________________
Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table |
![]() |
![]() |
Liked |
![]() |
#5 |
Senior Member
Join Date: Nov 2005
Location: Verrry South Jersey
Posts: 535
Likes: 127
Liked 233 Times in 124 Posts
|
![]()
The most "cooler" I ever used on a drag car trans was a deep pan that had tubing running through it.
Like this one: https://1ql7r63opl6d27eqyj26t0b7-wpe...03/DSC2597.jpg |
![]() |
![]() |
Liked |
![]() |
#6 |
Senior Member
Join Date: Sep 2006
Location: Fulton County, PA
Posts: 558
Likes: 12
Liked 785 Times in 221 Posts
|
![]()
Only thing I ever used (or needed) was an aluminum heat sink style cooler with removable ends so you could clean it out if needed.
|
![]() |
![]() |
Liked |
![]() |
#7 |
Senior Member
Join Date: Feb 2006
Posts: 634
Likes: 121
Liked 135 Times in 49 Posts
|
![]()
That cooler is a waste of money and all the input from others is exactly what we ran in a 9 second 3300 lb super stocker.
__________________
The more people I meet the more I like my dog Kevin |
![]() |
![]() |
![]() |
|
|