|
05-12-2014, 12:05 AM | #1 |
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,348
Likes: 433
Liked 676 Times in 260 Posts
|
P/G adjuster rod
I've got a stock P/G case that came with a car I bought. It has the hole for the band adjuster bored slightly over sized. Still has the stock threads, but down in the case the hole is larger, all the way through, than another stock case I have compared it to.. It has a rear roller bearing, too.
I was told it had a harder over sized adjuster rod for high apply pressure on the low band. Have you ever heard of such a part? Who sells it if you have? I hate to scrap the case because the rod moves around too much.
__________________
Adger Smith (Former SS) Last edited by Adger Smith; 05-12-2014 at 12:08 AM. Reason: sp |
05-12-2014, 02:11 AM | #2 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
Re: P/G adjuster rod
Adger,
Scotty Stites will known and if there is such a thing he will have it or can get it 662-587-3606. I know about a heat treated adjuster but "so far" have not heard of an oversize.
__________________
Larry Woodfin 471W |
05-12-2014, 02:13 AM | #3 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
Re: P/G adjuster rod
__________________
Larry Woodfin 471W |
|
|