SS/AH Head rules

Spyphish · 09-18-2012, 10:30 PM

I am new to class racing and was recently DQed at Indy trying to run the Hemi Shootout. It really did not matter as I was not fast. I do have 4 1/4"-20 allen bolts visable on the outside of the head as a valvetrain saftey measure and my NHRA letter cited "No external modifications to the head". So I am removing them and acknowledge my mistake as they are visable. NHRA will allow me to pass tech at next race and all is well.

I now have a better idea. My question before I do it, is can I mill the intake runner past the top of the valve cover bolt holes, and use the bottom remaining threads to hold an adapter plate so I can put the valve cover back on so it will seal? This will allow me to open the intake runner up. Of couse I will have to hike up the intake as well. Will these spacers be perceived as an "external modification" since it seems I am already the "bad boy" of Hemi. I just hate to do all this work and not pass. Thanks in advance for your advise. Stephen

Jeff Lee · 09-19-2012, 01:01 AM

I'd suggest a long talk with your Division Tech Director.

charlie westcott · 09-19-2012, 07:44 AM

apparantly that was legal as of indy. If it continues to be, than I will be back out after I get a new engine done, and watch me turn a tenth into 2 tenths.

Jeff Colvert · 09-19-2012, 11:19 AM

Quote:

Originally Posted by charlie westcott

apparantly that was legal as of indy. If it continues to be, than I will be back out after I get a new engine done, and watch me turn a tenth into 2 tenths.

I do love the way you think Charlie, reminds me of The Babe pointing to the out field as to where the ball was going over the fence. Keep up the good work.

Spyphish · 09-19-2012, 11:50 AM

Quote:

Originally Posted by charlie westcott

apparantly that was legal as of indy. If it continues to be, than I will be back out after I get a new engine done, and watch me turn a tenth into 2 tenths.

Darn! You mean somebody done' stole my idea!!!! I've been phished....

09-18-2012, 10:30 PM	#1
Spyphish Senior Member Join Date: Aug 2010 Posts: 840 Likes: 16 Liked 662 Times in 174 Posts	SS/AH Head rules I am new to class racing and was recently DQed at Indy trying to run the Hemi Shootout. It really did not matter as I was not fast. I do have 4 1/4"-20 allen bolts visable on the outside of the head as a valvetrain saftey measure and my NHRA letter cited "No external modifications to the head". So I am removing them and acknowledge my mistake as they are visable. NHRA will allow me to pass tech at next race and all is well. I now have a better idea. My question before I do it, is can I mill the intake runner past the top of the valve cover bolt holes, and use the bottom remaining threads to hold an adapter plate so I can put the valve cover back on so it will seal? This will allow me to open the intake runner up. Of couse I will have to hike up the intake as well. Will these spacers be perceived as an "external modification" since it seems I am already the "bad boy" of Hemi. I just hate to do all this work and not pass. Thanks in advance for your advise. Stephen

09-19-2012, 01:01 AM	#2
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 2 Times in 2 Posts	Re: SS/AH Head rules I'd suggest a long talk with your Division Tech Director. __________________ Jeff Lee 7494 D/S '70 AMX

09-19-2012, 07:44 AM	#3
charlie westcott Member Join Date: Dec 2001 Posts: 131 Likes: 0 Liked 218 Times in 7 Posts	Re: SS/AH Head rules apparantly that was legal as of indy. If it continues to be, than I will be back out after I get a new engine done, and watch me turn a tenth into 2 tenths.